SEARCH NOW FOR ALL YOUR IRONHORSE SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
AUTOMATION DIRECT
IRONHORSE
MTAP2-FAN-320
IRONHORSE MTCP2 SERIES MAIN COOLING FAN, REPLACEMENT. FOR USE WITH 324 AND 326 FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. NOT COMPATIBLE WITH MTC OR MTCP SERIES MOTORS.
€121.76
Price with VAT:
€144.89
AUTOMATION DIRECT
IRONHORSE
MTAP2-CFACE-400TC
IRONHORSE C-FLANGE, REPLACEMENT. FOR USE WITH 405T FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. MOUNTING HARDWARE INCLUDED. REPLACES DRIVE END BELL, FIELD INSTALL. NOT COMPATIBLE ...
€322.61
Price with VAT:
€383.91
AUTOMATION DIRECT
IRONHORSE
MTAP2-SHROUD-280
IRONHORSE FAN SHROUD, REPLACEMENT. FOR USE WITH 284 AND 286 FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. NOT COMPATIBLE WITH MTC OR MTCP SERIES MOTORS.
€109.31
Price with VAT:
€130.08
AUTOMATION DIRECT
IRONHORSE
MTGR-P05-1L132
IRONHORSE MTGR SERIES RIGHT ANGLE DUAL SHAFT DC GEAR MOTOR, 1/19HP, 90 VDC, 132RPM, 17 LB-IN FULL LOAD TORQUE, 0.67 FLA, 14.5:1 RATIO, 1/2IN SHAFT DIAMETER.
€400.53
Price with VAT:
€476.63
AUTOMATION DIRECT
IRONHORSE
MTGR-P05-1L197
IRONHORSE MTGR SERIES RIGHT ANGLE DUAL SHAFT DC GEAR MOTOR, 1/19HP, 90 VDC, 197RPM, 12 LB-IN FULL LOAD TORQUE, 0.68 FLA, 9.75:1 RATIO, 1/2IN SHAFT DIAMETER.
€412.37
Price with VAT:
€490.73
AUTOMATION DIRECT
IRONHORSE
MTGR-P14-1L040
IRONHORSE MTGR SERIES RIGHT ANGLE SINGLE SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 40RPM, 185 LB-IN FULL LOAD TORQUE, 1.64 FLA, 44:1 RATIO, 5/8IN SHAFT DIAMETER.
€442.59
Price with VAT:
€526.68
AUTOMATION DIRECT
IRONHORSE
MTPM-BRUSH-5
IRONHORSE DC MOTOR BRUSHES, REPLACEMENT. PACKAGE OF 2. FOR USE WITH IRONHORSE 1/6HP OR SMALLER 12 VDC OR 24 VDC MTPM, MTGR, MTGP AND VP1 SERIES PERMANENT MAGNET DC MOTORS AND GEARMOTORS. (2) ...
€33.77
Price with VAT:
€40.19
AUTOMATION DIRECT
IRONHORSE
MTPM-BRUSH-6
IRONHORSE DC MOTOR BRUSHES, REPLACEMENT. PACKAGE OF 2. FOR USE WITH IRONHORSE 1/7HP AND 1/8HP 90 VDC OR 180 VDC MTPM, MTGR, MTGP AND VP1 SERIES PERMANENT MAGNET DC MOTORS AND GEARMOTORS. (2) ...
€29.62
Price with VAT:
€35.25
AUTOMATION DIRECT
IRONHORSE
MTPM-BRUSH-7
IRONHORSE DC MOTOR BRUSHES, REPLACEMENT. PACKAGE OF 2. FOR USE WITH IRONHORSE 1/10HP OR SMALLER 90 VDC OR 180 VDC MTPM, MTGR, MTGP AND VP1 SERIES PERMANENT MAGNET DC MOTORS AND GEARMOTORS. ( ...
€25.13
Price with VAT:
€29.91
AUTOMATION DIRECT
IRONHORSE
WGA-30M-060-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, HOLLOW, 0.625IN DIAMETER OUTPUT SHAFT, NOMINAL 0.12HP AT 1.0 SF, 134 LB-IN MECHANICAL OUTPUT TORQUE, 30MM CENTER DISTANCE, CAS ...
€133.78
Price with VAT:
€159.20
AUTOMATION DIRECT
IRONHORSE
MTA2-FAN-56
IRONHORSE MTR SERIES MAIN COOLING FAN, REPLACEMENT. FOR USE WITH 56C FRAME IRONHORSE MTR2 SERIES MOTORS. NOT COMPATIBLE WITH MTR SERIES.
€25.77
Price with VAT:
€30.67
AUTOMATION DIRECT
IRONHORSE
MTA2-JBOX-56
IRONHORSE JUNCTION BOX, REPLACEMENT. FOR USE WITH 56C FRAME IRONHORSE MTR2 AND MTRP SERIES MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€25.77
Price with VAT:
€30.67
AUTOMATION DIRECT
IRONHORSE
MTA2-SHROUD-56
IRONHORSE FAN SHROUD, REPLACEMENT. FOR USE WITH 56C FRAME IRONHORSE MTR2 AND MTRP SERIES MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€25.77
Price with VAT:
€30.67
AUTOMATION DIRECT
IRONHORSE
MTA-CAP-10
IRONHORSE START CAPACITOR, REPLACEMENT. FOR USE WITH 1/3HP 3600RPM IRONHORSE MTR2 SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€25.77
Price with VAT:
€30.67
AUTOMATION DIRECT
IRONHORSE
MTA-CAP-11
IRONHORSE START CAPACITOR, REPLACEMENT. FOR USE WITH 1/3HP 1800RPM AND 1/2HP 3600RPM IRONHORSE MTR2 SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€26.66
Price with VAT:
€31.73
AUTOMATION DIRECT
IRONHORSE
MTA-CSW-08
IRONHORSE CENTRIFUGAL SWITCH, REPLACEMENT. FOR USE WITH 56C FRAME 1800RPM IRONHORSE MTR2 SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€23.11
Price with VAT:
€27.50
AUTOMATION DIRECT
IRONHORSE
MTAR-BASE-56
IRONHORSE REMOVABLE MOTOR BASE, REPLACEMENT. FOR USE WITH 56C IRONHORSE MTR SERIES MOTORS. NOT COMPATIBLE WITH MTR2 SERIES MOTORS.
€16.00
Price with VAT:
€19.04
AUTOMATION DIRECT
IRONHORSE
MTR2-002-1AB18
IRONHORSE MTR STANDARD EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, 2HP, 1-PHASE, 115/230 VAC, 1800RPM, TEFC, NEMA 56HC FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT.
€312.12
Price with VAT:
€371.43
AUTOMATION DIRECT
IRONHORSE
MTR2-P75-1AB36
IRONHORSE MTR STANDARD EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, 3/4HP, 1-PHASE, 115/230 VAC, 3600RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT.
€231.96
Price with VAT:
€276.03
AUTOMATION DIRECT
IRONHORSE
WGA-40M-ACC1
IRONHORSE OUTPUT FLANGE, FOR USE WITH ALL WGA-40M SERIES GEARBOXES. MOUNTING HARDWARE INCLUDED.
€14.36
Price with VAT:
€17.09
AUTOMATION DIRECT
IRONHORSE
WGA-40M-ACC3
IRONHORSE GEARBOX SINGLE OUTPUT SHAFT, 0.75IN. FOR USE WITH WGA-40M NEMA SERIES GEARBOXES. (3) KEYS, (1) SPACER AND (1) RETAINING RING INCLUDED.
€24.88
Price with VAT:
€29.61
AUTOMATION DIRECT
IRONHORSE
MTCP2-001-3BD18C
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 1HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 1800RPM, TEFC, NEMA 143TC FR ...
€257.73
Price with VAT:
€306.70
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
WGA-63M-010-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 3.52HP AT 1.0 SF, 1108 LB-IN MECHANICAL OUTPUT TORQUE, 63MM CENTER DISTANCE, CA ...
€270.18
Price with VAT:
€321.51
AUTOMATION DIRECT
IRONHORSE
WGA-63M-010-H2
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 145TC INPUT, HOLLOW, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 3.52HP AT 1.0 SF, 1108 LB-IN MECHANICAL OUTPUT TORQUE, 63MM CENTER DISTANCE, ...
€262.42
Price with VAT:
€312.28
AUTOMATION DIRECT
IRONHORSE
WGA-63M-020-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 2.06HP AT 1.0 SF, 1225 LB-IN MECHANICAL OUTPUT TORQUE, 63MM CENTER DISTANCE, CA ...
€265.04
Price with VAT:
€315.40
AUTOMATION DIRECT
IRONHORSE
WGA-63M-100-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 100:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 0.51HP AT 1.0 SF, 992 LB-IN MECHANICAL OUTPUT TORQUE, 63MM CENTER DISTANCE, CA ...
€222.32
Price with VAT:
€264.56
AUTOMATION DIRECT
IRONHORSE
WGA-63M-ACC3
IRONHORSE GEARBOX SINGLE OUTPUT SHAFT, 1.125IN. FOR USE WITH WGA-63M NEMA SERIES GEARBOXES. (3) KEYS, (1) SPACER AND (1) RETAINING RING INCLUDED.
€36.44
Price with VAT:
€43.36
AUTOMATION DIRECT
IRONHORSE
WGA-75M-010-H3
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 182/4TC INPUT, HOLLOW, 1.25IN DIAMETER OUTPUT SHAFT, NOMINAL 5.2HP AT 1.0 SF, 1656 LB-IN MECHANICAL OUTPUT TORQUE, 75MM CENTER DISTANCE, ...
€425.71
Price with VAT:
€506.59
AUTOMATION DIRECT
IRONHORSE
WGA-75M-ACC3
SHAFT, SINGLE OUTPUT, 1.25", FOR WGA-75M NEMA GEARBOXES, 3 KEYS INCLUDED, SPACER INCLUDED, RETAINING RING INCLUDED
€47.10
Price with VAT:
€56.05
AUTOMATION DIRECT
IRONHORSE
WGA-75M-ACC5
IRONHORSE OUTPUT COVER, FOR USE WITH ALL WGA-75M SERIES GEARBOXES. MOUNTING HARDWARE INCLUDED.
€10.77
Price with VAT:
€12.82
AUTOMATION DIRECT
IRONHORSE
GSD1-48-10C
IRONHORSE GSD1 SERIES DC FULL-FEATURED DRIVE, 12-48 VDC, 1-PHASE, 1/50 TO 1/8HP AT 12 VDC AND 1/12 TO 1/2HP AT 48 VDC, 10A, OPEN FRAME, PANEL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER INPU ...
€194.42
Price with VAT:
€231.36
AUTOMATION DIRECT
IRONHORSE
GSD1-48-10N4X
IRONHORSE GSD1 SERIES DC FULL-FEATURED DRIVE, 12-48 VDC, 1-PHASE, 1/50 TO 1/8HP AT 12 VDC AND 1/12 TO 1/2HP AT 48 VDC, 10A, NEMA 4X, WALL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER INPUT, P ...
€413.25
Price with VAT:
€491.77
AUTOMATION DIRECT
IRONHORSE
GSD1-48-20C
IRONHORSE GSD1 SERIES DC FULL-FEATURED DRIVE, 12-48 VDC, 1-PHASE, 1/50 TO 1/4HP AT 12 VDC AND 1/12 TO 1HP AT 48 VDC, 20A, OPEN FRAME, PANEL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER INPUT, ...
€229.29
Price with VAT:
€272.86
AUTOMATION DIRECT
IRONHORSE
WGA-30M-010-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, HOLLOW, 0.625IN DIAMETER OUTPUT SHAFT, NOMINAL 0.54HP AT 1.0 SF, 160 LB-IN MECHANICAL OUTPUT TORQUE, 30MM CENTER DISTANCE, CAS ...
€101.14
Price with VAT:
€120.35
AUTOMATION DIRECT
IRONHORSE
WGA-30M-030-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 30:1 RATIO, NEMA 56C INPUT, HOLLOW, 0.625IN DIAMETER OUTPUT SHAFT, NOMINAL 0.25HP AT 1.0 SF, 177 LB-IN MECHANICAL OUTPUT TORQUE, 30MM CENTER DISTANCE, CAS ...
€119.12
Price with VAT:
€141.75
AUTOMATION DIRECT
IRONHORSE
WGA-30M-ACC5
IRONHORSE OUTPUT COVER, FOR USE WITH ALL WGA-30M SERIES GEARBOXES. MOUNTING HARDWARE INCLUDED.
€7.47
Price with VAT:
€8.88
AUTOMATION DIRECT
IRONHORSE
WGA-40M-020-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, HOLLOW, 0.75IN DIAMETER OUTPUT SHAFT, NOMINAL 0.63HP AT 1.0 SF, 361 LB-IN MECHANICAL OUTPUT TORQUE, 40MM CENTER DISTANCE, CAST ...
€150.83
Price with VAT:
€179.49
AUTOMATION DIRECT
IRONHORSE
WG-325-BASE
IRONHORSE MOUNTING BASE, FOR USE WITH WG-325 SERIES GEARBOXES. MOUNTING HARDWARE INCLUDED.
€62.21
Price with VAT:
€74.03
AUTOMATION DIRECT
IRONHORSE
MTAP2-SHROUD-360
IRONHORSE FAN SHROUD, REPLACEMENT. FOR USE WITH 364 AND 365 FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. NOT COMPATIBLE WITH MTC OR MTCP SERIES MOTORS.
€202.63
Price with VAT:
€241.13
AUTOMATION DIRECT
IRONHORSE
MTAP2-JBOX-360
IRONHORSE JUNCTION BOX, REPLACEMENT. FOR USE WITH 364 AND 365 FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. NOT COMPATIBLE WITH MTC OR MTCP SERIES MOTORS.
€247.07
Price with VAT:
€294.01
AUTOMATION DIRECT
IRONHORSE
MTAP2-FAN-400
IRONHORSE MTCP2 SERIES MAIN COOLING FAN, REPLACEMENT. FOR USE WITH 405 FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. NOT COMPATIBLE WITH MTC OR MTCP SERIES MOTORS.
€231.07
Price with VAT:
€274.98
AUTOMATION DIRECT
IRONHORSE
MTCP2-1P5-3BD18
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 1-1/2HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 1800RPM, TEFC, NEMA 145T ...
€311.06
Price with VAT:
€370.16
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
MTAP2-JBOX-250
IRONHORSE JUNCTION BOX, REPLACEMENT. FOR USE WITH 254 AND 256 FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. NOT COMPATIBLE WITH MTC OR MTCP SERIES MOTORS.
€86.21
Price with VAT:
€102.59
AUTOMATION DIRECT
IRONHORSE
MTCP2-002-3BD18
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 2HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 1800RPM, TEFC, NEMA 145T FRA ...
€335.94
Price with VAT:
€399.77
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
MTCP2-001-3BD12
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 1HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 1200RPM, TEFC, NEMA 145T FRA ...
€320.83
Price with VAT:
€381.79
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
MTA-CAP-22
IRONHORSE START CAPACITOR, REPLACEMENT. FOR USE WITH 1-1/2HP 1800RPM IRONHORSE MTR2 SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€75.54
Price with VAT:
€89.90
AUTOMATION DIRECT
IRONHORSE
WG-175-010-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, LEFT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 1.57HP AT 1.0 SF, 515 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE ...
€205.30
Price with VAT:
€244.31
AUTOMATION DIRECT
IRONHORSE
WG-175-015-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 15:1 RATIO, NEMA 56C INPUT, LEFT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 1.24HP AT 1.0 SF, 554 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE ...
€205.30
Price with VAT:
€244.31
AUTOMATION DIRECT
IRONHORSE
WG-175-020-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, LEFT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 1.02HP AT 1.0 SF, 596 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE ...
€205.30
Price with VAT:
€244.31
