SEARCH NOW FOR ALL YOUR KERT SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
KERT
KVIK50/6
DISCONTINUED BY MANUFACTURER, BATTERY CHARGER LINEAR O=7.2VDC 0.5A
€19.24
Price with VAT:
€22.89
KERT
KVIK2406
DISCONTINUED BY MANUFACTURER, BATTERY CHARGER SWITCHING O=27.4VDC 6A
€76.95
Price with VAT:
€91.57
KENNAMETAL
HERTEL
300-001503
#1 60° 1/8" BODY DIAM SOLID CARBIDE COMBO DRILL & COUNTERSINK TIN FINISH, 1-1/2" OAL, DOUBLE END, RH CUT, PLAIN EDGE, 3/64" DRILL POINT DIAM, 3/64" DRILL POINT LENGTH
✓ IN STOCK!
€20.11
Price with VAT:
€23.93
KENNAMETAL
HERTEL
400.5625
TAPER LENGTH DRILL: 0.5625" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.5625
€28.86
Price with VAT:
€34.34
KENNAMETAL
HERTEL
400.265625
TAPER LENGTH DRILL: 0.2656" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.265625
€9.62
Price with VAT:
€11.45
KENNAMETAL
HERTEL
400.140625
TAPER LENGTH DRILL: 0.1406" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.140625
€6.82
Price with VAT:
€8.12
KENNAMETAL
HERTEL
306.84375
REDUCED SHANK DRILL BIT: 0.8438'' DIA, 3/4'' SHANK DIA, 118 DEG, HIGH-SPEED STEEL, (MOQ=1, PKG QTY=1)306.84375
€33.23
Price with VAT:
€39.54
KENNAMETAL
HERTEL
011059AS
SPIRAL POINT TAP: #10-32, UNF, 2 FLUTES, PLUG, HIGH SPEED STEEL, BRIGHT FINISH (MOQ=1, PKG QTY=1)011059AS
€35.85
Price with VAT:
€42.67
KENNAMETAL
HERTEL
008228AS
#10-24 PLUG RH H2 BRIGHT HIGH SPEED STEEL 4-FLUTE STRAIGHT FLUTE HAND TAP (MOQ=1, PKG QTY=1)008228AS
€5.77
Price with VAT:
€6.87
KENNAMETAL
HERTEL
008202AS25
SPIRAL POINT TAP: #8-32, UNC, 2 FLUTES, PLUG, HIGH SPEED STEEL, TIN FINISH (MOQ=1, PKG QTY=1)008202AS25
€10.49
Price with VAT:
€12.49
KENNAMETAL
HERTEL
007288AS
SPIRAL POINT STI TAP: M10 X 1 METRIC FINE, 3 FLUTES, PLUG, HIGH SPEED STEEL, BRIGHT/UNCOATED (MOQ=1, PKG QTY=1)007288AS
€42.85
Price with VAT:
€50.99
KENNAMETAL
HERTEL
H08700502
SCREWS FOR INDEXABLE THREADING FOR USE WITH ANVILSH08700502
€1.96
Price with VAT:
€2.34
KENNAMETAL
HERTEL
CH-10247
MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 992 LB CAPACITY, U-BAR, FLANGED BASE 62 HANDLE MOVEMENT, 100 BAR OPENING, STEEL
€26.50
Price with VAT:
€31.53
KENNAMETAL
HERTEL
CH-301-B
STANDARD STRAIGHT LINE ACTION CLAMP, 100 LB LOAD CAPACITY, 0.6575" PLUNGER TRAVEL, FLANGED BASE, STEEL 3 MOUNTING HOLE, 0.172" HOLE, 0.252" PLUNGER DIA, STRAIGHT HANDLECH-301-B
€12.24
Price with VAT:
€14.57
KENNAMETAL
HERTEL
CH-13007
MANUAL HOLD-DOWN TOGGLE CLAMPS, U-BAR, FLANGED, CLOSED, HOLDING CAPACITY (N) 1472.35, 331 LB, 150.14 KGCH-13007
€16.61
Price with VAT:
€19.77
KENNAMETAL
HERTEL
CH-36224
STANDARD STRAIGHT LINE ACTION CLAMP, 700 LB LOAD CAPACITY, 2.5787" PLUNGER TRAVEL, STEEL 0.618" PLUNGER DIA, STRAIGHT HANDLECH-36224
€33.23
Price with VAT:
€39.54
KENNAMETAL
HERTEL
CH-201-B
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 198 LB CAPACITY, U-BAR, FLANGED BASE 60 ° HANDLE MOVEMENT, 85 ° BAR OPENING, STEELCH-201-B
€9.62
Price with VAT:
€11.45
KENNAMETAL
HERTEL
CH-36003
STANDARD STRAIGHT LINE ACTION CLAMP, 600 LB LOAD CAPACITY, 1.252" PLUNGER TRAVEL, FLANGED BASE, STEEL 4 MOUNTING HOLE, 0.22" HOLE, 0.433" PLUNGER DIA, STRAIGHT HANDLECH-36003
€18.36
Price with VAT:
€21.85
KENNAMETAL
HERTEL
008297AS
SPIRAL POINT TAP: #12-24, UNC, 2 FLUTES, BOTTOMING, 2B/3B, HIGH SPEED STEEL, BRIGHT FINISH (MOQ=1, PKG QTY=1)008297AS
€10.49
Price with VAT:
€12.49
KENNAMETAL
HERTEL
008292AS
SPIRAL POINT TAP: #12-24, UNC, 2 FLUTES, PLUG, HIGH SPEED STEEL, BRIGHT FINISH (MOQ=1, PKG QTY=1)008292AS
€9.62
Price with VAT:
€11.45
KENNAMETAL
HERTEL
H00481556
SCREW FOR INDEXABLES :FOR USE WITH ANVILS (MOQ=5, PKG QTY=1)H00481556
€2.46
Price with VAT:
€2.93
KENNAMETAL
HERTEL
ETS 4-40
INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=10, PKG QTY=1)ETS 4-40
€7.87
Price with VAT:
€9.37
KENNAMETAL
HERTEL
CH-FC-121017
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M12, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M12, THREAD SIZE, M12X1.75, THREAD SIZE, M12X1.75, MA ...
€2.44
Price with VAT:
€2.91
KENNAMETAL
HERTEL
CH-FC-053508 PB
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: CAP; TYPE: CAP; FOR SPINDLE DIAMETER (MM): M5; FOR SPINDLE DIAMETER (MM - 0 DECIMALS): M5; THREAD SIZE: M5 X 0.8; THREAD SIZE: M5 X 0.8; MATE ...
€4.65
Price with VAT:
€5.54
KENNAMETAL
HERTEL
CH-SA-38300
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 3/8 ; THREAD SIZE: 3/8-16 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): 3 ...
€5.77
Price with VAT:
€6.87
KENNAMETAL
HERTEL
CH-SA-08034-T2
CLAMP SPINDLE ASSEMBLIES; APPLICATION: TOGGLE CLAMPS ; SPINDLE MATERIAL: NYLON ; THREAD SIZE: #5-32 ; THREAD LENGTH (MM): 0.7500 ; TIP TYPE: HEX ; TIP SURFACE DIAMETER (DECIMAL INCH): 0.1563 ...
€0.63
Price with VAT:
€0.75
KENNAMETAL
HERTEL
CH-FW-100
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; MATERIAL: CARBON STEEL ; MATERIAL: CARBON STEEL ; HOLE DIAMETER (DECIMAL INCH): 0.1650 ; HOLE DIAMETER (MM): 0.1650 ; HOLE DIAMETER: 0.1650 ; FINIS ...
€0.33
Price with VAT:
€0.40
KENNAMETAL
HERTEL
CH-201-A
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 60 LB CAPACITY, SOLID BAR, FLANGED BASE 80 ° HANDLE MOVEMENT, 90 ° BAR OPENING, STEELCH-201-A
€7.35
Price with VAT:
€8.74
KENNAMETAL
HERTEL
CH-FW-380
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; OVERALL WIDTH (DECIMAL INCH - 4 DECIMALS): 0.7500 ; MATERIAL: CARBON STEEL ; HOLE DIAMETER: 0.4000 ; FINISH COATING: ZINC ; UNSPSC CODE: 31161800 ( ...
€0.36
Price with VAT:
€0.43
KENNAMETAL
HERTEL
CH-40323
PULL-ACTION LATCH CLAMP, HORIZONTAL, 360 LB, U-HOOK, FLANGED BASE 1.18" DRAWING MOVEMENT, 3.07" OAL, STRAIGHT HANDLE, STEELCH-40323
€13.12
Price with VAT:
€15.61
KENNAMETAL
HERTEL
4139838
JOBBER DRILL, 1/2" DIA, 135 DEG POINT, COBALT TIALN COATED, 6" OAL, RIGHT HAND, SPIRAL FLUTE, STRAIGHT-CYLINDRICAL SHANK, SERIES JOBBER4139838
€25.36
Price with VAT:
€30.18
KENNAMETAL
HERTEL
CH-36092
STANDARD STRAIGHT LINE ACTION CLAMP, 397 LB LOAD CAPACITY, 1.2598" PLUNGER TRAVEL, FLANGED BASE, STEEL 4 MOUNTING HOLE, 0.203" HOLE, 0.5" PLUNGER DIA, STRAIGHT HANDLECH-36092
€18.36
Price with VAT:
€21.85
KENNAMETAL
HERTEL
CH-36330
STANDARD STRAIGHT-LINE ACTION CLAMPS; LOAD CAPACITY (N): 11120.5 ; LOAD CAPACITY (LB.): 2500.00 ; LOAD CAPACITY (KG): 1133.96 ; LOAD CAPACITY: 11121 ; PLUNGER TRAVEL (MM): 50 ; PLUNGER TRAVE ...
€26.50
Price with VAT:
€31.53
KENNAMETAL
HERTEL
MTS 255
INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=10, PKG QTY=1)MTS 255
€8.39
Price with VAT:
€9.99
KENNAMETAL
HERTEL
H08716540
SCREW FOR INDEXABLES :FOR USE WITH INSERTS (MOQ=5, PKG QTY=1)H08716540
€3.24
Price with VAT:
€3.86
KENNAMETAL
HERTEL
G837600
EXTENSION TAP, SPIRAL POINT TAP TYPE, 3/8-16 INCH THREAD SIZE, UNC THREAD STANDARD, H3 THREAD LIMIT, RIGHT HAND THREAD DIRECTION, 6 INCH OVERALL LENGTH, HIGH-SPEED STEEL, REDUCED SHANK, 3 FL ...
€44.60
Price with VAT:
€53.07
KENNAMETAL
HERTEL
CH-12132
MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 500 LB CAPACITY, U-BAR, FLANGED BASE 60 ° HANDLE MOVEMENT, 100 ° BAR OPENING, STEELCH-12132
€20.11
Price with VAT:
€23.93
KENNAMETAL
HERTEL
CH-FW-141
CARBON STEEL, FLANGED WASHER FOR M6 DIAM CLAMP SPINDLE (MOQ=1, PKG QTY=1)CH-FW-141
€8.39
Price with VAT:
€9.99
KENNAMETAL
HERTEL
CH-225-D
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 500 LB CAPACITY, U-BAR, FLANGED BASE 65 ° HANDLE MOVEMENT, 90 ° BAR OPENING, STEELCH-225-D
€10.49
Price with VAT:
€12.49
KENNAMETAL
HERTEL
CH-20235
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 750 LB CAPACITY, U-BAR, FLANGED BASE 55 ° HANDLE MOVEMENT, 85 ° BAR OPENING, STEELCH-20235
€17.49
Price with VAT:
€20.81
KENNAMETAL
HERTEL
CH-13005
MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 150 LB CAPACITY, U-BAR, FLANGED BASE 170 ° HANDLE MOVEMENT, 90 ° BAR OPENING, STEELCH-13005
€10.49
Price with VAT:
€12.49
KENNAMETAL
HERTEL
333-008560
COUNTERSINK: 3/4" HEAD DIA, 82 ° INCLUDED ANGLE, 3 FLUTES, CARBIDE, RIGHT HAND CUT (MOQ=1, PKG QTY=1)333-008560
€54.22
Price with VAT:
€64.52
KENNAMETAL
HERTEL
208.4375
EXTRA LENGTH DRILL BIT: 7/16" (0.4375), 118 DEG, HIGH SPEED STEEL, (MOQ=1, PKG QTY=1)208.4375
€25.36
Price with VAT:
€30.18
KENNAMETAL
HERTEL
208.421875
EXTRA LENGTH DRILL BIT: 0.4200", 118 &DEG, HIGH-SPEED STEEL, (MOQ=1, PKG QTY=1)208.421875
€32.36
Price with VAT:
€38.50
