SEARCH NOW FOR ALL YOUR SYSTOR SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
SYSTOR
SYS-CFD-7
MEMORY CARD DUPLICATOR, DRIVE COPIER, 2GB/MIN, 115V/230V, COMPACT FLASH, 4 BUTTONS, 256MB DDR3, 15~90% OPERATING HUMIDITY, 7 TARGETS
€625.39
Price with VAT:
€744.21
SYSTOR
SYS-CFAST-1
DRIVE COPIER, MEMORY CARD DUPLICATOR, 60MB/SEC, 1 TO 1, 265MB
€428.63
Price with VAT:
€510.08
KYOCERA
SGS TOOL
41657
SQUARE END MILL: 0.3937'' DIA, 0.6299'' LOC, 4 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)41657
€42.10
Price with VAT:
€50.10
KYOCERA
SGS TOOL
39856
SQUARE END MILLS; MILL DIAMETER (MM): 12.70 ; MILL DIAMETER (DECIMAL INCH): 0.5000 ; MILL DIAMETER (INCH): 1/2 ; NUMBER OF FLUTES: 4 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIM ...
€141.22
Price with VAT:
€168.05
KYOCERA
SGS TOOL
45705
BARREL CUTTER END MILLS; END TYPE: CIRCLE SEGMENT TAPER FORM ; MATERIAL: SOLID CARBIDE ; TAPER ANGLE PER SIDE: 20.00 ; SMALL END DIAMETER (MM): 2.50 ; SHANK DIAMETER (MM): 10.0000 ; LENGTH O ...
€127.18
Price with VAT:
€151.35
KYOCERA
SGS TOOL
39886
SQUARE END MILLS; MILL DIAMETER (MM): 14.29 ; MILL DIAMETER (DECIMAL INCH): 0.5625 ; MILL DIAMETER (INCH): 9/16 ; NUMBER OF FLUTES: 4 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECI ...
€214.90
Price with VAT:
€255.73
KYOCERA
SGS TOOL
33338
BALL END MILL: 1" DIA, 3" LOC, 2 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)33338
€432.42
Price with VAT:
€514.58
KYOCERA
SGS TOOL
31896
BALL END MILL: 0.5" DIA, 2" LOC, 2 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)31896
€89.47
Price with VAT:
€106.47
KYOCERA
SGS TOOL
31865
SQUARE END MILL: 7/16'' DIA, 3'' LOC, 7/16'' SHANK DIA, 6'' OAL, 4 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)31865
€101.75
Price with VAT:
€121.08
KYOCERA
SGS TOOL
44611
SQUARE END MILL: 0.3937'' DIA, 0.4724'' LOC, 2 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)44611
€114.90
Price with VAT:
€136.73
KYOCERA
SGS TOOL
38554
ROUGHING END MILL: 3/4" DIA, 5 FLUTES, 0.03" CORNER RADIUS, SOLID CARBIDE (MOQ=1, PKG QTY=1)38554
€235.95
Price with VAT:
€280.78
KYOCERA
SGS TOOL
37030
ROUGHING END MILL: 1/2" DIA, 5 FLUTES, SINGLE END, SOLID CARBIDE (MOQ=1, PKG QTY=1)37030
€89.47
Price with VAT:
€106.47
KYOCERA
SGS TOOL
34100
CORNER RADIUS END MILL: 1/2" DIA, 1" LOC, 4 MM RADIUS, 3 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)34100
€212.26
Price with VAT:
€252.59
KYOCERA
SGS TOOL
38525
CORNER RADIUS END MILL: 1/8" DIA, 1/4" LOC, 0.015" RADIUS, 5 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)38525
€28.07
Price with VAT:
€33.40
KYOCERA
SGS TOOL
38179
CORNER RADIUS END MILL: 5/8" DIA, 1-1/4" LOC, 0.0150" RADIUS, 4 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)38179
€133.32
Price with VAT:
€158.65
KYOCERA
SGS TOOL
37007
ROUGHING END MILL: 3/16" DIA, 5 FLUTES, 0.015" CORNER RADIUS, SOLID CARBIDE (MOQ=1, PKG QTY=1)37007
€33.33
Price with VAT:
€39.66
KYOCERA
SGS TOOL
30179
SQUARE END MILL: 3/8'' DIA, 1'' LOC, 3/8'' SHANK DIA, 2-1/2'' OAL, 4 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)30179
€33.33
Price with VAT:
€39.66
KYOCERA
SGS TOOL
07534
MICRO DRILL BIT: 1.45 MM DIA, (0.0571"), 130 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)07534
€9.65
Price with VAT:
€11.48
KYOCERA
SGS TOOL
07516
MICRO DRILL BIT: 1.30 MM DIA, (0.0512"), 130 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)07516
€9.65
Price with VAT:
€11.48
KYOCERA
SGS TOOL
03085
BALL END MILL: 0.024" DIA, 0.036" LOC, 4 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)03085
€25.44
Price with VAT:
€30.27
KYOCERA
SGS TOOL
68671
SCREW MACHINE LENGTH DRILL BIT: 2.30 MM (0.0906) DIA, 145 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)68671
€28.95
Price with VAT:
€34.44
KYOCERA
SGS TOOL
67068
SCREW MACHINE LENGTH DRILL BIT: 2.30 MM (0.0906) DIA, 180 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)67068
€55.26
Price with VAT:
€65.76
KYOCERA
SGS TOOL
63741
SCREW MACHINE LENGTH DRILL BIT: 3.10 MM (0.1220) DIA, 145 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)63741
€92.10
Price with VAT:
€109.60
KYOCERA
SGS TOOL
61078
JOBBER LENGTH DRILL BIT: 4.30 MM (0.1693) DIA, 118 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)61078
€31.58
Price with VAT:
€37.58
KYOCERA
SGS TOOL
61068
JOBBER LENGTH DRILL BIT: 3.10 MM (0.1220) DIA, 118 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)61068
€24.56
Price with VAT:
€29.23
KYOCERA
SGS TOOL
58823
SCREW MACHINE LENGTH DRILL BIT: 1/4" (0.2500) DIA, 180 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)58823
€173.67
Price with VAT:
€206.67
KYOCERA
SGS TOOL
57160
JOBBER LENGTH DRILL BIT: #8 (0.1990) DIA, 118 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)57160
€36.84
Price with VAT:
€43.84
KYOCERA
SGS TOOL
39854
SQUARE END MILLS; MILL DIAMETER (MM): 12.70 ; MILL DIAMETER (DECIMAL INCH): 0.5000 ; MILL DIAMETER (INCH): 1/2 ; NUMBER OF FLUTES: 4 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIM ...
€122.80
Price with VAT:
€146.13
KYOCERA
SGS TOOL
38500
ROUGHING END MILL: 1/8" DIA, 5 FLUTES, SINGLE END, SOLID CARBIDE (MOQ=1, PKG QTY=1)38500
€26.31
Price with VAT:
€31.31
KYOCERA
SGS TOOL
36812
CORNER RADIUS END MILL: 1/2" DIA, 1" LOC, 0.09" RADIUS, 4 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)36812
€105.25
Price with VAT:
€125.25
KYOCERA
SGS TOOL
39618
BALL END MILL: 0.1563" DIA, 0.3125" LOC, 4 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)39618
€33.33
Price with VAT:
€39.66
KYOCERA
SGS TOOL
37141
ROUGHING END MILL: 1" DIA, 5 FLUTES, 0.12" CORNER RADIUS, SOLID CARBIDE (MOQ=1, PKG QTY=1)37141
€373.65
Price with VAT:
€444.65
KYOCERA
SGS TOOL
34920
BALL END MILL: 0.375" DIA, 1" LOC, 3 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)34920
€42.98
Price with VAT:
€51.15
KYOCERA
SGS TOOL
31358
SQUARE END MILL: 0.0625" DIA, 0.125" LOC, 0.125" SHANK DIA, 1.5" OAL, 2 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)31358
€14.03
Price with VAT:
€16.70
KYOCERA
SGS TOOL
30578
BALL END MILL: 0.125" DIA, 0.375" LOC, 3 FLUTE, SOLID CARBIDE (MOQ=1, PKG QTY=1)30578
€15.79
Price with VAT:
€18.79
KYOCERA
SGS TOOL
74007
COUNTERSINK: 1/4" HEAD DIA, 60 ° INCLUDED ANGLE, 1 FLUTE, CARBIDE & SOLID CARBIDE, RIGHT HAND CUT (MOQ=1, PKG QTY=1)74007
€20.17
Price with VAT:
€24.01
KYOCERA
SGS TOOL
39883
CORNER RADIUS & CORNER CHAMFER END MILLS; MILL DIAMETER (INCH): 1/2 ; MILL DIAMETER (DECIMAL INCH): 0.5000 ; MILL DIAMETER (MM): 12.70 ; NUMBER OF FLUTES: 4 ; LENGTH OF CUT (INCH): 1-1/4 ; L ...
€147.36
Price with VAT:
€175.35
KYOCERA
SGS TOOL
39880
CORNER RADIUS & CORNER CHAMFER END MILLS; MILL DIAMETER (INCH): 1/2 ; MILL DIAMETER (DECIMAL INCH): 0.5000 ; MILL DIAMETER (MM): 12.70 ; NUMBER OF FLUTES: 4 ; LENGTH OF CUT (INCH): 1-1/4 ; L ...
€128.06
Price with VAT:
€152.39
KYOCERA
SGS TOOL
33423
ROUGHING END MILL: 1" DIA, 3 FLUTES, 0.03" CORNER RADIUS, CHIPBREAKER, SOLID CARBIDE (MOQ=1, PKG QTY=1)33423
€436.81
Price with VAT:
€519.80
KYOCERA
SGS TOOL
31413
SQUARE END MILL, 1/8" DIA, 1/4" LOC, 4 FLUTES, SOLID CARBIDE 1-1/2" OAL, 1/8" SHANK DIA, 30 ° HELIX, DOUBLE END, BRIGHT/UNCOATED, SERIES 1431413
€17.72
Price with VAT:
€21.08
KYOCERA
SGS TOOL
31421
SQUARE END MILL, 3/16" DIA, 3/8" LOC, 4 FLUTES, SOLID CARBIDE 2" OAL, 3/16" SHANK DIA, 30 ° HELIX, DOUBLE END, BRIGHT/UNCOATED, SERIES 1431421
€24.81
Price with VAT:
€29.52
KYOCERA
SGS TOOL
68682
SCREW MACHINE LENGTH DRILL BIT: 3.40 MM (0.1339) DIA, 145 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)68682
€33.33
Price with VAT:
€39.66
KYOCERA
SGS TOOL
55028
JOBBER LENGTH DRILL BIT: 1/2" (0.5000) DIA, 124 DEG, SOLID CARBIDE (MOQ=1, PKG QTY=1)55028
€257.87
Price with VAT:
€306.87
KYOCERA
SGS TOOL
49188
SQUARE END MILL: 0.2756" DIA, 0.4724" LOC, 0.315" SHANK DIA, 4 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)49188
€28.95
Price with VAT:
€34.44
KYOCERA
SGS TOOL
48926
SQUARE END MILL: 0.0394'' DIA, 0.0787'' LOC, 4 FLUTES, SOLID CARBIDE (MOQ=1, PKG QTY=1)48926
€23.68
Price with VAT:
€28.18
KYOCERA
SGS TOOL
39904
SQUARE END MILLS; MILL DIAMETER (MM): 19.05 ; MILL DIAMETER (DECIMAL INCH): 0.7500 ; MILL DIAMETER (INCH): 3/4 ; NUMBER OF FLUTES: 4 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIM ...
€341.20
Price with VAT:
€406.03
KYOCERA
SGS TOOL
39890
SQUARE END MILLS; MILL DIAMETER (MM): 15.88 ; MILL DIAMETER (DECIMAL INCH): 0.6250 ; MILL DIAMETER (INCH): 5/8 ; NUMBER OF FLUTES: 4 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIM ...
€228.93
Price with VAT:
€272.43
