SEARCH NOW FOR ALL YOUR TEKNIC SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
TEKNIC
CCIO-8
DIGITAL I/O EXPANSION MODULE, 24 V, 8-POINT, WITHOUT TERMINAL BLOCK PLUG, DIN RAIL MOUNT, ALUMINUM MOUNTING PLATE
✓ IN STOCK!
€47.90
Price with VAT:
€57.00
Repair Yours
Contact Us
TEKNIC
RES-225
ENERGY DISSAPATION UNIT, SERIES CLEARPATH, REGENERATED ENERGY SHUNT, SCREW TERMINALS, BLOCK CONNECTOR, 250-7000W POWER RATING, 300VDC
✓ IN STOCK!
€124.55
Price with VAT:
€148.21
TEKNIC
E3PS12-75
DISCONTINUED BY MANUFACTURER, INTELLIGENT POWER SUPPLY, 75 VDC, 3.5 AMPS, 115 VAC OR 230 VAC NOMINAL INPUT VOLTAGE, 50-60 HZ, OUTPUT VOLTAGE @ RATED CURRENT 72.0 VDC MIN., OUPUT VOLTAGE- NO ...
€191.06
Price with VAT:
€227.36
TEKNIC
CPM-MCPV-2310S-RLN
SERVO MOTOR, NEMA 23 - 2.33 IN (59.18 MM) SQ, 24-75VDC,
€200.78
Price with VAT:
€238.93
TEKNIC
SST-3PS12-75
DISCONTINUED BY MANUFACTURER, POWER SUPPLY COMPONENT, 75 VDC, RATED LOAD CURRENT (DC): 3.5A, 50/60 HZ, PEAK CURRENT CAPABILITY (3 SEC.): 12.0A, POWER CONSUMPTION: 450 VA
€185.50
Price with VAT:
€220.74
TEKNIC
M-2311C-QN-02D
SERVO MOTOR, BRUSHLESS, 7.7A, 223 OZ-IN, 6000RPM
€140.55
Price with VAT:
€167.25
TEKNIC
CPM-MCVC-2310S-RQN
SERVO MOTOR, INTEGRATED SYSTEM, NEMA 23 FRAME, 24-75VDC, 400RPM MAX
€249.95
Price with VAT:
€297.44
TEKNIC
CPM-MCVC-3421D-RLN
SERVO MOTOR, 24-75VDC, MAX SPEED 4000 RPM, 0.5IN SHAFT DIA, 935 W PEAK, LOGIC INPUT VOLTAGE RANGE 4.0-28VDC
€245.17
Price with VAT:
€291.75
TEKNIC
M-2321P-LN-08D
MOTOR, SHAFT DIAMETER: 0.375 IN (9.53 MM), 8 POLE, NEMA 23, 6000 RPM
€259.54
Price with VAT:
€308.86
TEKNIC
CPM-SDSK-2311S-ELN
SERVO MOTOR, CLEARPATH-SDSK, 4000 RPM, 0.16 HP, 24-75 V, 0.375 INCH SHAFT, WITHOUT SHAFT SEAL
€289.72
Price with VAT:
€344.77
TEKNIC
CPM-MCPV-2321S-RLN
SERVO MOTOR, .375 INCH SHAFT DIAMETER, NO SHAFT SEAL, 24-75VDC, 10 AMP
€328.63
Price with VAT:
€391.07
TEKNIC
CPM-SDSK-3411S-RLS
SERVO MOTOR, 0.29 HP, 2320 RPM, 220 W, 75 V, 664 OZ-IN, IP53
€309.55
Price with VAT:
€368.37
TEKNIC
M-2330-FH
SERVO MOTOR, ROTARY MOTOR, INSTRUMENT GRADE, BRUSHLESS, PERMANENT MAGNET, 8000 QUAD/REV, W/ NEMA FLANGE, LIGHT-MED DUTY OEM APPLICATIONS
✓ IN STOCK!
€157.18
Price with VAT:
€187.05
TEKNIC
M-2311P-LN-04D
SERVO MOTOR, NEMA FRAME SIZE 23, STACK LENGTH 1, MINIFIT-16 PIGTAIL, FREE-HANGING, WINDING A, STANDARD SHAFT, WITH PARALLEL KEYWAY, DUST SEAL, 4000 COUNTS/REVOLUTION, DIFFERENTIAL ENCODER
✓ IN STOCK!
€192.71
Price with VAT:
€229.33
TEKNIC
EGL12B04RP024-5000LK
PROXIMITY SWITCH INDUCTIVE 10/30VDC 250MA NO
✓ IN STOCK!
€13.61
Price with VAT:
€16.20
TEKNIC
SST-3000-829
DISCONTINUED BY MANUFACTURER, SERVO DRIVE, ACX OPTION, SST SERVO SYSTEM, S-VECTOR TECHNOLOGY, SYNCHRONOUS
✓ IN STOCK!
€82.96
Price with VAT:
€98.72
TEKNIC
M-3437-FX
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, BRUSHLESS, PERMANENT MAGNET, ROTARY MOTOR, 8000 QUAD/REV, 20-90 VDC, 7.5 A RMS, NEMA 34 FLANGE
✓ IN STOCK!
€83.64
Price with VAT:
€99.53
TEKNIC
TG-540-1-2-16
DISCONTINUED BY MANUFACTURER, SERVO DRIVE ACCESSORY, TRAJECTORY GENERATOR
✓ IN STOCK!
€169.31
Price with VAT:
€201.47
TEKNIC
TG-540-1-2-10
DISCONTINUED BY MANUFACTURER, NETWORKED SERVO/STEPPER, TRAJECTORY GENERATOR, 40 VDC, 200-350 MA, 15 MHZ, 0 TO +40 DEGREES C
✓ IN STOCK!
€38.86
Price with VAT:
€46.24
TEKNIC
IPC-5
POWER SUPPLY, 350 WATT CONTINUOUS, 500 WATT FAN-COOLED, 900 WATTS PEAK, 75 VDC OUTPUT, 108 TO 250 VAC INPUT
✓ IN STOCK!
€234.69
Price with VAT:
€279.28
TEKNIC
CPM-MCVC-2331S-RLN
SERVO MOTOR, MOTOR FRAME SIZE- NEMA 23 - 2.33 IN, 24-75 VDC, PEAK TORQUE- 620 OZ-IN, CONT. (RMS) TORQUE- 124 OZ-IN, MAX SPEED- 2520 RPM, PEAK POWER- 355 W, CONT. (RMS) POWER- 206 W
✓ IN STOCK!
€108.52
Price with VAT:
€129.13
TEKNIC
CPM-SDSK-2321S-RLN
SERVO MOTOR, NO SHAFT SEAL, .375IN SHAFT DIA, ENHANCED OPTION
✓ IN STOCK!
€267.63
Price with VAT:
€318.48
TEKNIC
CLCR-4-13
I/O AND MOTION CONTROLLER, 20-28VDC, IP20, 13 I/O POINTS, USB 2.0, 32 BIT FLOATING POINT ARM M4F PROCESSOR
✓ IN STOCK!
€95.06
Price with VAT:
€113.12
TEKNIC
CPM-MCVC-3421S-RLN
MOTOR, INPUT 24-75 VDC, MAX 90 VDC, PEAK TORQUE @75 VDC, 7.7 NM, 1410 RPM, ORIGIN USA
✓ IN STOCK!
€265.31
Price with VAT:
€315.72
TEKNIC
ISC-M423-KCX-5-5-D
SERVO CONTROLLER, INTEGRATED DSP-BASE, 23AMP, 24-90VDC
✓ IN STOCK!
€333.30
Price with VAT:
€396.62
TEKNIC
CPM-MCPV-2311S-RLN
MOTOR, MCPV SERIES, 24-75 VDC, 10 AMP, 0.375 IN SHAFT DIAMETER
✓ IN STOCK!
€203.16
Price with VAT:
€241.76
TEKNIC
SC4-HUB
COMMUNICATION ANS I/O BOARD, FOR CLEARPATH-SC SERIES, 15-30 VOLTS, NEMA 23 AND 34 FRAME SIZES
✓ IN STOCK!
€61.68
Price with VAT:
€73.40
TEKNIC
CPM-MCPV-2310S-RLS
INTEGRATED SERVO, NEMA 23, INPUT (BUS): 24-75 VDC, 4000 RPM, 45 OZ-IN TORQUE, ACHIEVABLE RESOLUTION:0.450 DEGREES,ROTOR INERTIA: 0.4 OZ-IN², LOGIC INPUT: 4.0 TO 28 VDC
✓ IN STOCK!
€143.40
Price with VAT:
€170.64
TEKNIC
CPM-SDSK-3411D-RLS
SERVO MOTOR, INTEGRATED SERVO SYSTEM, CLEARPATH SERIES, 1/2 INCH STROKE, 24/75 VDC, 10 AMPS, MOTOR FRAME SIZE: NEMA 34 - 3.42 INCHES, 220 WATTS, 4000 RPM
✓ IN STOCK!
€387.37
Price with VAT:
€460.97
TEKNIC
CPM-MCPV-3441S-RLN
SERVO MOTOR, CLEARPATH-MCPV, CONTROL POSITION, NEMA 34 - 3.42 IN, 24-75 VDC , 840 RPM, -40 TO +70 C
✓ IN STOCK!
€388.89
Price with VAT:
€462.78
TEKNIC
CLNK-4-13
ETHERNET/IP MOTION AND I/O CONTROLLER, 20-28VDC, IP20, 13 I/O POINTS, 10BASE-T/100BASE-TX ETHERNET, 500KHZ (STEP PULSE WIDTH FIXED AT 1 MICROSECOND)
✓ IN STOCK!
€319.76
Price with VAT:
€380.51
TEKNIC
CPM-SCSK-2311S-RQNA
MOTOR, SCSK SERIES, 24-75 VDC, 0.25 IN SHAFT DIAMETER, 4000 RPM, 120 WATTS
✓ IN STOCK!
€144.09
Price with VAT:
€171.47
TEKNIC
CPM-MCPV-3411S-RLN
SERVO MOTOR, MCPV SERIES, FRAME SIZE 34, 0.50IN SHAFT DIA, 3.14IN LENGTH, 24-90VDC INPUT, 75VDC USER VOLTAGE, 6387 PEAK TORQUE, 286WATT PEAK, 2320 RPM PEAK
✓ IN STOCK!
€212.59
Price with VAT:
€252.98
TEKNIC
CPM-SCSK-2311S-RQNB
SERVO MOTOR, 120 W, 4000 RPM, 24-75 V, 25 LBF MAX RADIAL LOAD, 5.0 LBF MAX THRUST LOAD, 0.250 INCH SHAFT DIAMETER, IP53
✓ IN STOCK!
€274.55
Price with VAT:
€326.71
TEKNIC
EGT-18B08-RN024-5000L
PROXIMITY SWITCH 10/30VDC 250MA NO 3WIRE CABLE
€25.87
Price with VAT:
€30.78
TEKNIC
2AS2-3PSR
DISCONTINUED BY MANUFACTURER, SELECTOR SWITCH EXTENDED 3POS MOMENTARY BLACK
€19.68
Price with VAT:
€23.42
TEKNIC
M-3422C-LN-08D
STEPPER MOTOR 11.7AMP 19.5V 267.2OZ-IN 6000RPM
€139.69
Price with VAT:
€166.23
TEKNIC
CPM-MCVC-3432P-RLN
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, INTEGRATED SERVO SYSTEM, INPUT VOLTAGE 24-75 VDC, TORQUE 209 OZ-IN, MAX SPEED 2380 RPM, FRAME SIZE NEMA 34 - 3.42 IN (86.87 MM) SQ
€347.41
Price with VAT:
€413.42
TEKNIC
CPM-SDSK-3441D-RLN
CLEARPATH® INTEGRATED SERVO SYSTEM, 24-75 VDC (90 VDC MAX) , NEMA 34 - 3.42 IN (86.87 MM) SQ., 3150 RPM
€384.18
Price with VAT:
€457.17
TEKNIC
CPM-MCVC-3432D-RLN
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, NEMA 34 FRAME, 3.42" FRAME SIZE, 4.63" LENGTH, 24 TO 75 V DC BUS, 90 V DC MAX, 4000 RPM MAX SPEED, 1121 W PEAK POWER, 358 W CONTINUOUS POWER, 121 T ...
€297.28
Price with VAT:
€353.76
TEKNIC
M-3432P-LN-20D
SERVO MOTOR,6000RPM,10AMP,CLASS F,29.2 V/KRPM,341.9 OZ-IN,FLANGED
€336.26
Price with VAT:
€400.15
TEKNIC
CPM-MCVC-2310S-RLN
SERVO MOTOR, 223OZ-IN TORQUE, 4000RPM, 24 - 90 VDC
€248.33
Price with VAT:
€295.52
TEKNIC
CPM-MCVC-3436P-RLN
INTEGRATED SERVO SYSTEM, 24-75 VDC INPUT, 1,047 OZ-IN PEAK TORQUE, 2370 RPM
€361.08
Price with VAT:
€429.69
