JETZT NACH ALLEN IN FRAGE KOMMENDEN IRONHORSE LÖSUNGEN SUCHEN
Radwell ist für Sie da und versorgt Sie mit allem, was Sie für Ihre Produktionshallen benötigen.
Radwell ist kein autorisierter Anbieter, Reseller oder Vertreter der Produkte, die auf dieser Website angeboten werden. Alle Produktnamen, Handelsnamen, Marken und Logos auf dieser Website sind Eigentum ihrer jeweiligen Besitzer. Die Darstellung, Beschreibung oder der Verkauf der Produkte, die diese Namen , Handelsmarken, Marken und Logos tragen, dient nur zur Identifizierung und nicht dazu, auf Zugehörigkeiten der oder Autorisierungen durch die Rechteinhaber hinzuweisen.
Filterergebnisse
AUTOMATION DIRECT
IRONHORSE
ACN-3MRC
IRONHORSE ACN SERIES KEYPAD MOUNT, FOR USE WITH ACN-LCD REMOTE KEYPAD. (1) 9.8FT/3M ETHERNET PATCH CABLE INCLUDED.
€26,31
Preis inkl. MwSt.:
€31,31
AUTOMATION DIRECT
IRONHORSE
WGA-75M-ACC5
IRONHORSE OUTPUT COVER, FOR USE WITH ALL WGA-75M SERIES GEARBOXES. MOUNTING HARDWARE INCLUDED.
€10,63
Preis inkl. MwSt.:
€12,65
AUTOMATION DIRECT
IRONHORSE
WGA-75M-010-H3
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 182/4TC INPUT, HOLLOW, 1.25IN DIAMETER OUTPUT SHAFT, NOMINAL 5.2HP AT 1.0 SF, 1656 LB-IN MECHANICAL OUTPUT TORQUE, 75MM CENTER DISTANCE, ...
€389,44
Preis inkl. MwSt.:
€463,44
AUTOMATION DIRECT
IRONHORSE
MTPM-BRUSH-6
IRONHORSE DC MOTOR BRUSHES, REPLACEMENT. PACKAGE OF 2. FOR USE WITH IRONHORSE 1/7HP AND 1/8HP 90 VDC OR 180 VDC MTPM, MTGR, MTGP AND VP1 SERIES PERMANENT MAGNET DC MOTORS AND GEARMOTORS. (2) ...
€29,23
Preis inkl. MwSt.:
€34,79
AUTOMATION DIRECT
IRONHORSE
MTSP-P50-3BD18
IRONHORSE MTS PREMIUM EFFICIENCY AC INDUCTION MOTOR, WASHDOWN AND INVERTER RATED, 1/2HP, 3-PHASE, 208-230/460 VAC, 1800RPM, TEFC, NEMA 56C FRAME, 304 STAINLESS STEEL, C-FACE/RIGID BASE MOUNT ...
€454,35
Preis inkl. MwSt.:
€540,68
AUTOMATION DIRECT
IRONHORSE
ACNND-21P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 230 VAC, 1HP WITH 3-PHASE INPUT, 1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 1 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OPTI ...
€242,09
Preis inkl. MwSt.:
€288,08
AUTOMATION DIRECT
IRONHORSE
ACNND-2010
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 230 VAC, 10HP WITH 3-PHASE INPUT, 5HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 3 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OPTIO ...
€678,02
Preis inkl. MwSt.:
€806,84
AUTOMATION DIRECT
IRONHORSE
ACN-27P5
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 230 VAC, 7-1/2HP WITH 3-PHASE INPUT, 3HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 3 FRAME, RS-485, INTEGRATED DYN ...
€896,42
Preis inkl. MwSt.:
€1.066,74
AUTOMATION DIRECT
IRONHORSE
ACNND-47P5
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 460 VAC, 7-1/2HP WITH 3-PHASE INPUT, 3HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 3 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OP ...
€676,26
Preis inkl. MwSt.:
€804,75
AUTOMATION DIRECT
IRONHORSE
ACN-2020
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 230 VAC, 20HP WITH 3-PHASE INPUT, 10HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 5 FRAME, RS-485, INTEGRATED DYNAM ...
€1.406,91
Preis inkl. MwSt.:
€1.674,22
AUTOMATION DIRECT
IRONHORSE
ACN-VFDS
IRONHORSE WINDOWS CONFIGURATION AND PROGRAMMING SOFTWARE, USB OR FREE DOWNLOAD. FOR USE WITH IRONHORSE ACG AND ACN SERIES DRIVES. REQUIRES PC SERIAL PORT, USB-RS232-1 OR USB-485M SERIAL ADAP ...
€10,53
Preis inkl. MwSt.:
€12,53
AUTOMATION DIRECT
IRONHORSE
HMMP-32HR-6
IRONHORSE MANUAL MOTOR PROTECTOR, ROTARY, 6A, THERMAL OVERLOAD, 4.0-6.0A ADJUSTABLE, 78A INSTANTANEOUS TRIP RATING, 45MM FRAME.
€46,07
Preis inkl. MwSt.:
€54,82
AUTOMATION DIRECT
IRONHORSE
HMX2-LUG-CR
IRONHORSE BOX TYPE WIRING LUG, LINE OR LOAD MOUNT, 2 OPENINGS, #3 AWG-4/0 MCM WIRE(S). PACKAGE OF 3. FOR USE WITH HMC-265 TO HMC-400 CONTACTORS.
€78,94
Preis inkl. MwSt.:
€93,94
AUTOMATION DIRECT
IRONHORSE
HMC-40A30-22-AS
IRONHORSE IEC CONTACTOR, 40A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 120 VAC (50/60HZ) COIL VOLTAGE.
€64,91
Preis inkl. MwSt.:
€77,24
AUTOMATION DIRECT
IRONHORSE
ACNND-2020
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 230 VAC, 20HP WITH 3-PHASE INPUT, 10HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 5 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OPTI ...
€953,43
Preis inkl. MwSt.:
€1.134,59
AUTOMATION DIRECT
IRONHORSE
ACNND-23P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 230 VAC, 3HP WITH 3-PHASE INPUT, 1-1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 2 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OP ...
€330,68
Preis inkl. MwSt.:
€393,50
AUTOMATION DIRECT
IRONHORSE
ACN-4010
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 460 VAC, 10HP WITH 3-PHASE INPUT, 5HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 3 FRAME, RS-485, INTEGRATED DYNAMI ...
€1.218,33
Preis inkl. MwSt.:
€1.449,81
AUTOMATION DIRECT
IRONHORSE
ACNND-45P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 460 VAC, 5HP WITH 3-PHASE INPUT, 2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 2 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OPTION ...
€518,38
Preis inkl. MwSt.:
€616,87
AUTOMATION DIRECT
IRONHORSE
MTSN-P50-3BD18
IRONHORSE MTS PREMIUM EFFICIENCY AC INDUCTION MOTOR, WASHDOWN AND INVERTER RATED, 1/2HP, 3-PHASE, 208-230/460 VAC, 1800RPM, TENV, NEMA 56C FRAME, 304 STAINLESS STEEL, C-FACE/RIGID BASE MOUNT ...
€395,11
Preis inkl. MwSt.:
€470,18
AUTOMATION DIRECT
IRONHORSE
MTRP-001-3BD18
IRONHORSE MTR PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE AND INVERTER RATED, 1HP, 3-PHASE, 208-230/460 VAC, 1800RPM, TEFC, NEMA 56C/HC FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID ...
€244,51
Preis inkl. MwSt.:
€290,96
AUTOMATION DIRECT
IRONHORSE
WGA-50M-ACC5
IRONHORSE OUTPUT COVER, FOR USE WITH ALL WGA-50M SERIES GEARBOXES. MOUNTING HARDWARE INCLUDED.
€13,16
Preis inkl. MwSt.:
€15,66
AUTOMATION DIRECT
IRONHORSE
WGA-50M-ACC3
IRONHORSE GEARBOX SINGLE OUTPUT SHAFT, 1IN. FOR USE WITH WGA-50M NEMA SERIES GEARBOXES. (3) KEYS, (1) SPACER AND (1) RETAINING RING INCLUDED.
€23,68
Preis inkl. MwSt.:
€28,18
AUTOMATION DIRECT
IRONHORSE
MTCP2-010-3BD18
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 10HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 1800RPM, TEFC, NEMA 215T FR ...
€928,00
Preis inkl. MwSt.:
€1.104,32
AUTOMATION DIRECT
IRONHORSE
MTCP2-003-3BD36
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 3HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 3600RPM, TEFC, NEMA 182T FRA ...
€372,78
Preis inkl. MwSt.:
€443,61
AUTOMATION DIRECT
IRONHORSE
WGA-30M-ACC1
IRONHORSE OUTPUT FLANGE, FOR USE WITH ALL WGA-30M SERIES GEARBOXES. MOUNTING HARDWARE INCLUDED.
€13,16
Preis inkl. MwSt.:
€15,66
AUTOMATION DIRECT
IRONHORSE
MTGR-P14-1L022
IRONHORSE MTGR SERIES RIGHT ANGLE SINGLE SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 22RPM, 280 LB-IN FULL LOAD TORQUE, 1.41 FLA, 82:1 RATIO, 5/8IN SHAFT DIAMETER.
€420,98
Preis inkl. MwSt.:
€500,97
AUTOMATION DIRECT
IRONHORSE
GSD7-240-5CR3
IRONHORSE GSD7 SERIES DC REVERSING DRIVE, 240 VAC, 1-PHASE, 1/8 TO 1HP AT 180 VDC, 5.5A, OPEN FRAME, PANEL MOUNT, BUILT-IN REVERSE, MAXIMUM 3 REVERSES/MINUTE, POTENTIOMETER INPUT, SCR OUTPUT ...
€255,12
Preis inkl. MwSt.:
€303,59
AUTOMATION DIRECT
IRONHORSE
WG-175-040-H
IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, HOLLOW, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 0.74HP AT 1.0 SF, 714 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE, CAST ...
€225,05
Preis inkl. MwSt.:
€267,81
AUTOMATION DIRECT
IRONHORSE
WG-175-060-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 0.38HP AT 1.0 SF, 469 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANC ...
€198,16
Preis inkl. MwSt.:
€235,81
AUTOMATION DIRECT
IRONHORSE
MTPM-1P5-1L18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1-1/2HP, 90 VDC, 1800RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
€408,87
Preis inkl. MwSt.:
€486,55
AUTOMATION DIRECT
IRONHORSE
MTPM-P33-1L18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/3HP, 90 VDC, 1800RPM, TENV, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
€233,64
Preis inkl. MwSt.:
€278,04
AUTOMATION DIRECT
IRONHORSE
GSDA-AI-V4
DISCONTINUED BY MANUFACTURER, IRONHORSE GSD4 SERIES ANALOG INPUT MODULE, 1-CHANNEL, CURRENT/VOLTAGE, ISOLATED, INPUT CURRENT SIGNAL RANGE(S) OF 4-20 MA, INPUT VOLTAGE SIGNAL RANGE(S) OF 0-5 ...
€88,45
Preis inkl. MwSt.:
€105,25
Ihre Produkte reparieren
Contact Us
AUTOMATION DIRECT
IRONHORSE
GSD7-120-10CR30
IRONHORSE GSD7 SERIES DC REVERSING DRIVE, 120 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC, 10A, OPEN FRAME, PANEL MOUNT, BUILT-IN REVERSE, MAXIMUM 30 REVERSES/MINUTE, POTENTIOMETER INPUT, SCR OUTPUT.
€283,46
Preis inkl. MwSt.:
€337,32
AUTOMATION DIRECT
IRONHORSE
WG-175-020-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 1.02HP AT 1.0 SF, 596 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANC ...
€200,14
Preis inkl. MwSt.:
€238,16
AUTOMATION DIRECT
IRONHORSE
WG-262-005-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 182TC INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 5.24HP AT 1.0 SF, 924 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTAN ...
€306,65
Preis inkl. MwSt.:
€364,91
AUTOMATION DIRECT
IRONHORSE
MTPM-P50-1M18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/2HP, 180 VDC, 1800RPM, TENV, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
€251,68
Preis inkl. MwSt.:
€299,50
AUTOMATION DIRECT
IRONHORSE
MTPM-002-1M18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 2HP, 180 VDC, 1800RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
€648,53
Preis inkl. MwSt.:
€771,75
AUTOMATION DIRECT
IRONHORSE
MTR2-P75-3BD36
IRONHORSE MTR STANDARD EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE AND INVERTER RATED, 3/4HP, 3-PHASE, 230/460 VAC, 3600RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BAS ...
€160,63
Preis inkl. MwSt.:
€191,15
AUTOMATION DIRECT
IRONHORSE
MTR2-P75-3BD18
IRONHORSE MTR STANDARD EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE AND INVERTER RATED, 3/4HP, 3-PHASE, 230/460 VAC, 1800RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BAS ...
€187,26
Preis inkl. MwSt.:
€222,84
AUTOMATION DIRECT
IRONHORSE
MTRP-001-3BD36
IRONHORSE MTR PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE AND INVERTER RATED, 1HP, 3-PHASE, 208-230/460 VAC, 3600RPM, TEFC, NEMA 56C/HC FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID ...
€209,22
Preis inkl. MwSt.:
€248,97
AUTOMATION DIRECT
IRONHORSE
MTGR-P05-1L132
IRONHORSE MTGR SERIES RIGHT ANGLE DUAL SHAFT DC GEAR MOTOR, 1/19HP, 90 VDC, 132RPM, 17 LB-IN FULL LOAD TORQUE, 0.67 FLA, 14.5:1 RATIO, 1/2IN SHAFT DIAMETER.
€394,62
Preis inkl. MwSt.:
€469,60
AUTOMATION DIRECT
IRONHORSE
MTGP-P20-1K018
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/5HP, 24 VDC, 18RPM, 280 LB-IN FULL LOAD TORQUE, 4.41 FLA, 110:1 RATIO, 5/8IN SHAFT DIAMETER.
€399,72
Preis inkl. MwSt.:
€475,67
AUTOMATION DIRECT
IRONHORSE
MTGP-P14-1L039
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 39RPM, 189 LB-IN FULL LOAD TORQUE, 1.59 FLA, 46:1 RATIO, 5/8IN SHAFT DIAMETER.
€347,03
Preis inkl. MwSt.:
€412,96
AUTOMATION DIRECT
IRONHORSE
MTGP-P06-1L114
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/17HP, 90 VDC, 114RPM, 26 LB-IN FULL LOAD TORQUE, 0.61 FLA, 26:1 RATIO, 5/16IN SHAFT DIAMETER.
€215,60
Preis inkl. MwSt.:
€256,57
AUTOMATION DIRECT
IRONHORSE
MTCP2-002-3BD18C
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 2HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 1800RPM, TEFC, NEMA 145TC FR ...
€301,92
Preis inkl. MwSt.:
€359,28
AUTOMATION DIRECT
IRONHORSE
MTPM-P14-1M18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/7HP, 180 VDC, 1828RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
€205,30
Preis inkl. MwSt.:
€244,30
AUTOMATION DIRECT
IRONHORSE
WG-175-005-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 2.83HP AT 1.0 SF, 499 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE ...
€118,67
Preis inkl. MwSt.:
€141,22
AUTOMATION DIRECT
IRONHORSE
GSD5-240-10N4-R
IRONHORSE GSD5 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC AND 1/4 TO 2HP AT 180 VDC, 10.8A, NEMA 4/12, WALL MOUNT, BUILT-IN REVERSE, POTENTIOMETER INPUT, SCR ...
€355,62
Preis inkl. MwSt.:
€423,19
AUTOMATION DIRECT
IRONHORSE
WG-262-060-H
IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.4375IN DIAMETER OUTPUT SHAFT, NOMINAL 1.16HP AT 1.0 SF, 1670 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, ...
€437,99
Preis inkl. MwSt.:
€521,21
