JETZT NACH ALLEN IN FRAGE KOMMENDEN KENNAMETAL LÖSUNGEN SUCHEN
Radwell ist für Sie da und versorgt Sie mit allem, was Sie für Ihre Produktionshallen benötigen.
Radwell ist kein autorisierter Anbieter, Reseller oder Vertreter der Produkte, die auf dieser Website angeboten werden. Alle Produktnamen, Handelsnamen, Marken und Logos auf dieser Website sind Eigentum ihrer jeweiligen Besitzer. Die Darstellung, Beschreibung oder der Verkauf der Produkte, die diese Namen , Handelsmarken, Marken und Logos tragen, dient nur zur Identifizierung und nicht dazu, auf Zugehörigkeiten der oder Autorisierungen durch die Rechteinhaber hinzuweisen.
Filterergebnisse
KENNAMETAL
HERTEL
CH-301-B
STANDARD STRAIGHT LINE ACTION CLAMP, 100 LB LOAD CAPACITY, 0.6575" PLUNGER TRAVEL, FLANGED BASE, STEEL 3 MOUNTING HOLE, 0.172" HOLE, 0.252" PLUNGER DIA, STRAIGHT HANDLECH-301-B
€12,28
Preis inkl. MwSt.:
€14,61
KENNAMETAL
HERTEL
CH-36010
STANDARD STRAIGHT LINE ACTION CLAMP, 800 LB LOAD CAPACITY, 1.6063" PLUNGER TRAVEL, FLANGED BASE, STEEL 4 MOUNTING HOLE, 0.3438" HOLE, 0.614" PLUNGER DIA, STRAIGHT HANDLECH-36010
€26,31
Preis inkl. MwSt.:
€31,31
KENNAMETAL
HERTEL
CH-FW-100
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; MATERIAL: CARBON STEEL ; MATERIAL: CARBON STEEL ; HOLE DIAMETER (DECIMAL INCH): 0.1650 ; HOLE DIAMETER (MM): 0.1650 ; HOLE DIAMETER: 0.1650 ; FINIS ...
€0,33
Preis inkl. MwSt.:
€0,40
KENNAMETAL
HERTEL
CH-SA-08034-T2
CLAMP SPINDLE ASSEMBLIES; APPLICATION: TOGGLE CLAMPS ; SPINDLE MATERIAL: NYLON ; THREAD SIZE: #5-32 ; THREAD LENGTH (MM): 0.7500 ; TIP TYPE: HEX ; TIP SURFACE DIAMETER (DECIMAL INCH): 0.1563 ...
€0,64
Preis inkl. MwSt.:
€0,76
KENNAMETAL
HERTEL
CH-SA-38300
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: FLAT TIP ; FOR SPINDLE DIAMETER (INCH): 3/8 ; THREAD SIZE: 3/8-16 ; MATERIAL: CARBON STEEL ; FINISH COATING: ZINC ; OVERALL LENGTH (INCH): 3 ...
€5,79
Preis inkl. MwSt.:
€6,89
KENNAMETAL
HERTEL
CH-10247
MANUAL HOLD-DOWN TOGGLE CLAMP, VERTICAL, 992 LB CAPACITY, U-BAR, FLANGED BASE 62 HANDLE MOVEMENT, 100 BAR OPENING, STEEL
€26,58
Preis inkl. MwSt.:
€31,63
KENNAMETAL
HERTEL
CH-201
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 60 LB CAPACITY, U-BAR, FLANGED BASE 80 HANDLE MOVEMENT, 90 BAR OPENING, STEEL
€7,37
Preis inkl. MwSt.:
€8,77
KENNAMETAL
HERTEL
CH-20752-B
MANUAL HOLD-DOWN TOGGLE CLAMP, HORIZONTAL, 165 LB CAPACITY, U-BAR, FLANGED BASE 76 ° HANDLE MOVEMENT, 94 ° BAR OPENING, STEELCH-20752-B
€9,65
Preis inkl. MwSt.:
€11,48
KENNAMETAL
HERTEL
CH-FC-053508 PB
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; TYPE: CAP; TYPE: CAP; FOR SPINDLE DIAMETER (MM): M5; FOR SPINDLE DIAMETER (MM - 0 DECIMALS): M5; THREAD SIZE: M5 X 0.8; THREAD SIZE: M5 X 0.8; MATE ...
€4,67
Preis inkl. MwSt.:
€5,56
KENNAMETAL
HERTEL
CH-FC-121017
CLAMP SPINDLE RETAINERS & FLANGED WASHERS, TYPE, CAP, TYPE, CAP, FOR SPINDLE DIAMETER (MM), M12, FOR SPINDLE DIAMETER (MM - 0 DECIMALS), M12, THREAD SIZE, M12X1.75, THREAD SIZE, M12X1.75, MA ...
€2,45
Preis inkl. MwSt.:
€2,91
KENNAMETAL
HERTEL
CH-FW-120
CLAMP SPINDLE RETAINERS & FLANGED WASHERS; OVERALL WIDTH (DECIMAL INCH - 4 DECIMALS): 0.9720 ; MATERIAL: CARBON STEEL ; HOLE DIAMETER: 0.5100 ; FINISH COATING: ZINC ; UNSPSC CODE: 31161800 ( ...
€10,53
Preis inkl. MwSt.:
€12,53
KENNAMETAL
HERTEL
H08700403
SCREW FOR INDEXABLES :FOR USE WITH INSERTS (MOQ=5, PKG QTY=1)H08700403
€4,22
Preis inkl. MwSt.:
€5,02
KENNAMETAL
HERTEL
H08700502
SCREWS FOR INDEXABLE THREADING FOR USE WITH ANVILSH08700502
€1,97
Preis inkl. MwSt.:
€2,34
KENNAMETAL
HERTEL
ETS 4-40
INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=10, PKG QTY=1)ETS 4-40
€7,89
Preis inkl. MwSt.:
€9,39
KENNAMETAL
HERTEL
G837600
EXTENSION TAP, SPIRAL POINT TAP TYPE, 3/8-16 INCH THREAD SIZE, UNC THREAD STANDARD, H3 THREAD LIMIT, RIGHT HAND THREAD DIRECTION, 6 INCH OVERALL LENGTH, HIGH-SPEED STEEL, REDUCED SHANK, 3 FL ...
€44,73
Preis inkl. MwSt.:
€53,23
KENNAMETAL
HERTEL
H00481556
SCREW FOR INDEXABLES :FOR USE WITH ANVILS (MOQ=5, PKG QTY=1)H00481556
€2,47
Preis inkl. MwSt.:
€2,94
KENNAMETAL
HERTEL
H08700619
SCREW FOR INDEXABLES :FOR USE WITH INSERTS (MOQ=5, PKG QTY=1)H08700619
€4,63
Preis inkl. MwSt.:
€5,51
KENNAMETAL
HERTEL
H08716516
SCREWS FOR INDEXABLE THREADING FOR USE WITH INSERTSH08716516
€1,94
Preis inkl. MwSt.:
€2,31
KENNAMETAL
HERTEL
H08716540
SCREW FOR INDEXABLES :FOR USE WITH INSERTS (MOQ=5, PKG QTY=1)H08716540
€3,25
Preis inkl. MwSt.:
€3,87
KENNAMETAL
HERTEL
H82331646
GROOVING INSERT, SOLID CARBIDE, TIC/TIN FINISH, INSERT HAND: RIGHT HAND, 0.055 INCH CUTTING WIDTH, 0.071 INCH MAX DEPTH, EXTERNAL RELIEF ANGLE: 10, INSCRIBED CIRCLE: 3/8 INCH, INSERT STYLE:1 ...
€13,16
Preis inkl. MwSt.:
€15,66
KENNAMETAL
HERTEL
MTS 35
INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=10, PKG QTY=1)MTS 35
€5,79
Preis inkl. MwSt.:
€6,89
KENNAMETAL
HERTEL
MR34-0433.406
CHUCKING REAMER, 1 - 2 MM DIAMETER RANGE, 1.1 MM DIAMETER, SOLID CARBIDE, SPIRAL FLUTE, LEFT HAND SPIRAL, BRIGHT/UNCOATED, STRAIGHT-CLYINDRICAL SHANK, NO DOWELL PIN REAMER, 50 MM LENGTH, 4 F ...
€66,66
Preis inkl. MwSt.:
€79,33
KENNAMETAL
HERTEL
MTS 255
INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=10, PKG QTY=1)MTS 255
€8,42
Preis inkl. MwSt.:
€10,02
KENNAMETAL
HERTEL
MTS 183
INSERT SCREW FOR INDEXABLES, TORX DRIVE INSERT HOLDING SCREW COMPATIBLE (MOQ=5, PKG QTY=1)MTS 183
€7,89
Preis inkl. MwSt.:
€9,39
KENNAMETAL
HERTEL
R127930-S
1-1/2 - 11-1/2 7-FLUTE BRIGHT FINISH HIGH SPEED STEEL STANDARD FLUTE TAP 4-1/4" OAL, NPTR127930-S
€213,14
Preis inkl. MwSt.:
€253,64
KENNAMETAL
HERTEL
SZ0034B
ABRASIVE BUR: SD-9, BALL (MOQ=1, PKG QTY=1)SZ0034B
€63,15
Preis inkl. MwSt.:
€75,15
KENNAMETAL
1021530
MODULAR LATHE SHANK: NEUTRAL, KM32, ROUND SHANK 5.25" SQUARE SHANK LENGTH, 6.75" OAL, SERIES NCM-S ROUND SHANK EXTENDED LENGTH
€728,01
Preis inkl. MwSt.:
€866,34
KENNAMETAL
1120816
TAP COLLET: ER32, 0.4724", (MOQ=1, PKG QTY=1)1120816
€110,52
Preis inkl. MwSt.:
€131,52
KENNAMETAL
1528422
5.95" MAX DRILL DEPTH, 2.5XD, 60.3MM DIAM, INDEXABLE INSERT DRILL, (MOQ=1, PKG QTY=1)1528422
€744,68
Preis inkl. MwSt.:
€886,17
KENNAMETAL
1616107
REPLACEABLE-TIP DRILL: 36.12 TO 37.12 MM DIA, 111 MM MAX DEPTH, 38.1 MM WELDON FLAT SHANK, (MOQ=1, PKG QTY=1)1616107
€646,44
Preis inkl. MwSt.:
€769,26
KENNAMETAL
1729929
REPLACEABLE-TIP DRILL: 23.81 TO 24 MM DIA, 238.13 MM MAX DEPTH, 25.4 MM STRAIGHT-CYLINDRICAL SHANK, (MOQ=1, PKG QTY=1)1729929
€564,87
Preis inkl. MwSt.:
€672,19
KENNAMETAL
1749368
CAT40 TAPER, 3/4" INSIDE HOLE DIAM, 2-3/4" PROJECTION, STRAIGHT SHANK WITH FLAT ADAPTER, (MOQ=1, PKG QTY=1)1749368
€231,56
Preis inkl. MwSt.:
€275,56
KENNAMETAL
1749369
CAT40 TAPER, 1" INSIDE HOLE DIAM, 4-1/2" PROJECTION, STRAIGHT SHANK WITH FLAT ADAPTER, (MOQ=1, PKG QTY=1)1749369
€264,89
Preis inkl. MwSt.:
€315,22
KENNAMETAL
1749474
CAT50 TAPER, 1-1/4" INSIDE HOLE DIAM, 4" PROJECTION, STRAIGHT SHANK WITH FLAT ADAPTER, (MOQ=1, PKG QTY=1)1749474
€301,73
Preis inkl. MwSt.:
€359,06
KENNAMETAL
2036658
1-3/8" MAX DRILL DEPTH, 2XD, 0.6882" DIAM, INDEXABLE INSERT DRILL, (MOQ=1, PKG QTY=1)2036658
€397,34
Preis inkl. MwSt.:
€472,83
KENNAMETAL
2272790
3.42807R021 KC7315 CARBIDE DRILL CHAMFER INSERT, (MOQ=1, PKG QTY=1)2272790
€26,31
Preis inkl. MwSt.:
€31,31
Ihre Produkte reparieren
Contact Us
KENNAMETAL
2613792
3.41020R902 KC7315 CARBIDE DRILL CHAMFER INSERT, (MOQ=10, PKG QTY=1)
€20,17
Preis inkl. MwSt.:
€24,01
Ihre Produkte reparieren
Contact Us
KENNAMETAL
2615046
3.41220R902 KC7315 CARBIDE DRILL CHAMFER INSERT, (MOQ=5, PKG QTY=1)2615046
€25,44
Preis inkl. MwSt.:
€30,27
Ihre Produkte reparieren
Contact Us
KENNAMETAL
3026653
HYDRAULIC CHUCK SLEEVE: 8 MM ID, 20 MM OD, 25 MM HEAD DIA, (MOQ=1, PKG QTY=1)3026653
€147,36
Preis inkl. MwSt.:
€175,35
KENNAMETAL
3026659
HYDRAULIC CHUCK SLEEVE: 14 MM ID, 20 MM OD, 25 MM HEAD DIA COOLANT THROUGH, 1.969" LENGTH UNDER HEAD, STEEL
€125,43
Preis inkl. MwSt.:
€149,26
KENNAMETAL
3367387
WRENCH FOR INDEXABLE TOOLS, (MOQ=1, PKG QTY=1)3367387
€31,58
Preis inkl. MwSt.:
€37,58
KENNAMETAL
5964187
KSEM1250SPL CARBIDE REPLACEABLE TIP DRILL ALTIN FINISH, 140° INCLUDED ANGLE, 1-1/4" DIAM, SERIES KSEM5964187
€214,02
Preis inkl. MwSt.:
€254,68
KENNAMETAL
6370906
KTFST16000HPLM KCMS15 CARBIDE REPLACEABLE TIP DRILL ALTIN FINISH, 140° INCLUDED ANGLE, 16MM DIAM, THROUGH COOLANT, SERIES KTFS6370906
€112,27
Preis inkl. MwSt.:
€133,60
KENNAMETAL
6370917
KTFST11100HPCM KC7410 CARBIDE REPLACEABLE TIP DRILL ALCR FINISH, 143° INCLUDED ANGLE, 11.1MM DIAM, THROUGH COOLANT, SERIES KTFS
€71,05
Preis inkl. MwSt.:
€84,55
Ihre Produkte reparieren
Contact Us
KENNAMETAL
6371988
REPLACEABLE-TIP DRILL: STRAIGHT SHANK, 12.00 MM SHANK DIA (MOQ=1, PKG QTY=1)6371988
€247,35
Preis inkl. MwSt.:
€294,35
