JETZT NACH ALLEN IN FRAGE KOMMENDEN SCHUNK LÖSUNGEN SUCHEN
Radwell ist für Sie da und versorgt Sie mit allem, was Sie für Ihre Produktionshallen benötigen.
Tools / Chuck
Radwell ist kein autorisierter Anbieter, Reseller oder Vertreter der Produkte, die auf dieser Website angeboten werden. Alle Produktnamen, Handelsnamen, Marken und Logos auf dieser Website sind Eigentum ihrer jeweiligen Besitzer. Die Darstellung, Beschreibung oder der Verkauf der Produkte, die diese Namen , Handelsmarken, Marken und Logos tragen, dient nur zur Identifizierung und nicht dazu, auf Zugehörigkeiten der oder Autorisierungen durch die Rechteinhaber hinzuweisen.
Filterergebnisse
SCHUNK
207915
HYDRAULIC CHUCK SLEEVE: 8 MM ID, 12 MM OD, 16.5 MM HEAD DIA COOLANT THROUGH, 1.7717" LENGTH UNDER HEAD, STEEL
€86,73
Preis inkl. MwSt.:
€103,21
SCHUNK
159101
10" MAX CHUCK DIAM SERRATED HARD LATHE CHUCK MASTER JAWS 0 STEPS, CASE HARDENED STEEL
€361,81
Preis inkl. MwSt.:
€430,55
SCHUNK
207947
HYDRAULIC CHUCK SLEEVE: 20 MM ID, 32 MM OD, 35.5 MM HEAD DIA COOLANT THROUGH, 2.3819" LENGTH UNDER HEAD, STEEL
€76,22
Preis inkl. MwSt.:
€90,70
SCHUNK
217929
12MM ID X 20MM OD, 24MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
€84,10
Preis inkl. MwSt.:
€100,08
SCHUNK
217933
16MM ID X 20MM OD, 24MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
€84,10
Preis inkl. MwSt.:
€100,08
SCHUNK
217947
20MM ID X 32MM OD, 35.5MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 60.5MM LENGTH UNDER HEAD
€84,10
Preis inkl. MwSt.:
€100,08
SCHUNK
217960
1/8" ID X 3/4" OD, 24MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
€91,11
Preis inkl. MwSt.:
€108,42
SCHUNK
224412
3/4" ID X 1-1/4" OD, 35.5MM HEAD DIAM, SEALED HYDRAULIC CHUCK SLEEVE STEEL, 60.5MM LENGTH UNDER HEAD, THROUGH COOLANT
€85,85
Preis inkl. MwSt.:
€102,17
SCHUNK
224434
1/8" ID X 20MM OD, 24MM HEAD DIAM, SEALED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD, THROUGH COOLANT
€125,28
Preis inkl. MwSt.:
€149,08
SCHUNK
132615
8" MAX CHUCK CAPACITY, 1.5MM X 60° SERRATED INTERFACE, SQUARE SOFT LATHE CHUCK JAW 3 JAW, STEEL, 25MM BTW MOUNT HOLE CTRS, 102MM LONG, 40MM WIDE, 100MM HIGH, 14MM GROOVE, M12MM FASTENER
€104,25
Preis inkl. MwSt.:
€124,06
SCHUNK
133111
HARD LATHE CHUCK JAW: 250 MM MAX CHUCK DIA, TOP 2 STEP, 1.1811'' BETWEEN MOUNT HOLE CENTERS, CASE HARDENED STEEL
€475,70
Preis inkl. MwSt.:
€566,08
SCHUNK
217378
1/4" ID X 1/2" OD, 16.5MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 45MM LENGTH UNDER HEAD
€91,11
Preis inkl. MwSt.:
€108,42
SCHUNK
217884
3/8" ID X 20MM OD, 24MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
€125,28
Preis inkl. MwSt.:
€149,08
SCHUNK
217913
6MM ID X 12MM OD, 16.5MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 45MM LENGTH UNDER HEAD
€90,23
Preis inkl. MwSt.:
€107,38
SCHUNK
217923
6MM ID X 20MM OD, 24MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
€84,10
Preis inkl. MwSt.:
€100,08
SCHUNK
224378
1/4" ID X 1/2" OD, 16.5MM HEAD DIAM, SEALED HYDRAULIC CHUCK SLEEVE STEEL, 45MM LENGTH UNDER HEAD, THROUGH COOLANT
€81,47
Preis inkl. MwSt.:
€96,95
SCHUNK
224388
1/4" ID X 3/4" OD, 24MM HEAD DIAM, SEALED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD, THROUGH COOLANT
€81,47
Preis inkl. MwSt.:
€96,95
SCHUNK
132131
12" MAX CHUCK CAPACITY, 1.5MM X 60° SERRATED INTERFACE, SQUARE SOFT LATHE CHUCK JAW 3 JAW, STEEL, 30MM BTW MOUNT HOLE CTRS, 60MM HIGH, 21MM GROOVE, M16MM FASTENER
€83,22
Preis inkl. MwSt.:
€99,04
SCHUNK
159100
8" MAX CHUCK DIAM SERRATED HARD LATHE CHUCK MASTER JAWS 0 STEPS, CASE HARDENED STEEL
€307,49
Preis inkl. MwSt.:
€365,92
SCHUNK
217927
10MM ID X 20MM OD, 24MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
€90,23
Preis inkl. MwSt.:
€107,38
SCHUNK
217965
7/16" ID X 3/4" OD, 24MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
€91,11
Preis inkl. MwSt.:
€108,42
SCHUNK
217972
6MM ID X 3/4" OD, 24MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
€120,02
Preis inkl. MwSt.:
€142,82
SCHUNK
224385
8MM ID X 1/2" OD, 16.5MM HEAD DIAM, SEALED HYDRAULIC CHUCK SLEEVE STEEL, 45MM LENGTH UNDER HEAD, THROUGH COOLANT
€120,02
Preis inkl. MwSt.:
€142,82
SCHUNK
224386
1/8" ID X 3/4" OD, 24MM HEAD DIAM, SEALED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD, THROUGH COOLANT
€81,47
Preis inkl. MwSt.:
€96,95
SCHUNK
224392
1/2" ID X 3/4" OD, 24MM HEAD DIAM, SEALED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD, THROUGH COOLANT
€81,47
Preis inkl. MwSt.:
€96,95
SCHUNK
807232
HYDRAULIC POWER LATHE CHUCK: 10" DIA, 3 JAWS, A2-8 MOUNT 2.953" THROUGH HOLE DIA, 24,593 LB PER JAW
€3.893,17
Preis inkl. MwSt.:
€4.632,87
SCHUNK
807242
HYDRAULIC POWER LATHE CHUCK: 12-1/2" DIA, 3 JAWS, A2-8 MOUNT 3.583" THROUGH HOLE DIA, 32,592 LB PER JAW
€5.920,35
Preis inkl. MwSt.:
€7.045,22
SCHUNK
807243
HYDRAULIC POWER LATHE CHUCK: 12-1/2" DIA, 3 JAWS, A2-11 MOUNT 3.583" THROUGH HOLE DIA, 32,592 LB PER JAW
€5.920,35
Preis inkl. MwSt.:
€7.045,22
SCHUNK
217888
5/8" ID X 20MM OD, 24MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
€125,28
Preis inkl. MwSt.:
€149,08
SCHUNK
224384
6MM ID X 1/2" OD, 16.5MM HEAD DIAM, SEALED HYDRAULIC CHUCK SLEEVE STEEL, 45MM LENGTH UNDER HEAD, THROUGH COOLANT
€120,02
Preis inkl. MwSt.:
€142,82
SCHUNK
224400
HYDRAULIC CHUCK SLEEVE: 10 MM ID, 19.05 MM OD, 24 MM HEAD DIA COOLANT THROUGH, 2" LENGTH UNDER HEAD, STEEL
€120,02
Preis inkl. MwSt.:
€142,82
SCHUNK
224436
1/4" ID X 20MM OD, 24MM HEAD DIAM, SEALED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD, THROUGH COOLANT
€125,28
Preis inkl. MwSt.:
€149,08
SCHUNK
132600
6" MAX CHUCK CAPACITY, 1.5MM X 60° SERRATED INTERFACE, SQUARE SOFT LATHE CHUCK JAW 3 JAW, STEEL, 20MM BTW MOUNT HOLE CTRS, 82MM LONG, 32MM WIDE, 32MM HIGH, 12MM GROOVE, M10MM FASTENER
€66,58
Preis inkl. MwSt.:
€79,23
SCHUNK
132602
10" MAX CHUCK CAPACITY, 1.5MM X 60° SERRATED INTERFACE, SQUARE SOFT LATHE CHUCK JAW 3 JAW, STEEL, 30MM BTW MOUNT HOLE CTRS, 125MM LONG, 40MM WIDE, 42MM HIGH, 16MM GROOVE, M12MM FASTENER
€77,97
Preis inkl. MwSt.:
€92,78
SCHUNK
132604
12" MAX CHUCK CAPACITY, 1.5MM X 60° SERRATED INTERFACE, SQUARE SOFT LATHE CHUCK JAW 3 JAW, STEEL, 30MM BTW MOUNT HOLE CTRS, 145MM LONG, 50MM WIDE, 50MM HIGH, 21MM GROOVE, M14MM FASTENER
€93,74
Preis inkl. MwSt.:
€111,55
SCHUNK
132608
10" MAX CHUCK CAPACITY, 1.5MM X 60° SERRATED INTERFACE, SQUARE SOFT LATHE CHUCK JAW 3 JAW, STEEL, 30MM BTW MOUNT HOLE CTRS, 125MM LONG, 40MM WIDE, 100MM HIGH, 16MM GROOVE, M12MM FASTENER
€110,38
Preis inkl. MwSt.:
€131,36
SCHUNK
217988
3/4" ID X 1-1/4" OD, 35.5MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 60.5MM LENGTH UNDER HEAD
€91,99
Preis inkl. MwSt.:
€109,46
SCHUNK
217992
1" ID X 1-1/4" OD, 35.5MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 60.5MM LENGTH UNDER HEAD
€91,99
Preis inkl. MwSt.:
€109,46
SCHUNK
807211
HYDRAULIC POWER LATHE CHUCK: 6-1/2" DIA, 3 JAWS, A2-5 MOUNT 1.77" THROUGH HOLE DIA, 12,814 LB PER JAW
€2.635,16
Preis inkl. MwSt.:
€3.135,84
SCHUNK
153102
12" MAX CHUCK CAPACITY, TONGUE & GROOVE INTERFACE, SQUARE SOFT LATHE CHUCK JAW 3 JAW, STEEL, 40MM BTW MOUNT HOLE CTRS, 55.5MM HIGH, 12MM GROOVE, M12MM FASTENER
€89,36
Preis inkl. MwSt.:
€106,34
SCHUNK
207913
HYDRAULIC CHUCK SLEEVE: 6 MM ID, 12 MM OD, 16.5 MM HEAD DIA COOLANT THROUGH, 1.7717" LENGTH UNDER HEAD, STEEL
€86,73
Preis inkl. MwSt.:
€103,21
SCHUNK
207921
HYDRAULIC CHUCK SLEEVE: 4 MM ID, 20 MM OD, 24 MM HEAD DIA COOLANT THROUGH, 1.9882" LENGTH UNDER HEAD, STEEL
€86,73
Preis inkl. MwSt.:
€103,21
SCHUNK
217948
25MM ID X 32MM OD, 35.5MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 60.5MM LENGTH UNDER HEAD
€84,10
Preis inkl. MwSt.:
€100,08
SCHUNK
217966
1/2" ID X 3/4" OD, 24MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
€91,11
Preis inkl. MwSt.:
€108,42
SCHUNK
217973
8MM ID X 3/4" OD, 24MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50.5MM LENGTH UNDER HEAD
€120,02
Preis inkl. MwSt.:
€142,82
SCHUNK
217984
1/2" ID X 1-1/4" OD, 35.5MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 60.5MM LENGTH UNDER HEAD
€91,99
Preis inkl. MwSt.:
€109,46
SCHUNK
132601
8" MAX CHUCK CAPACITY, 1.5MM X 60° SERRATED INTERFACE, SQUARE SOFT LATHE CHUCK JAW 3 JAW, STEEL, 25MM BTW MOUNT HOLE CTRS, 102MM LONG, 35MM WIDE, 40MM HIGH, 14MM GROOVE, M12MM FASTENER
€66,58
Preis inkl. MwSt.:
€79,23
SCHUNK
132606
6" MAX CHUCK CAPACITY, 1.5MM X 60° SERRATED INTERFACE, SQUARE SOFT LATHE CHUCK JAW 3 JAW, STEEL, 20MM BTW MOUNT HOLE CTRS, 82MM LONG, 35MM WIDE, 60MM HIGH, 12MM GROOVE, M10MM FASTENER
€89,36
Preis inkl. MwSt.:
€106,34
