JETZT NACH ALLEN IN FRAGE KOMMENDEN TEKNIC LÖSUNGEN SUCHEN
Radwell ist für Sie da und versorgt Sie mit allem, was Sie für Ihre Produktionshallen benötigen.
Radwell ist kein autorisierter Anbieter, Reseller oder Vertreter der Produkte, die auf dieser Website angeboten werden. Alle Produktnamen, Handelsnamen, Marken und Logos auf dieser Website sind Eigentum ihrer jeweiligen Besitzer. Die Darstellung, Beschreibung oder der Verkauf der Produkte, die diese Namen , Handelsmarken, Marken und Logos tragen, dient nur zur Identifizierung und nicht dazu, auf Zugehörigkeiten der oder Autorisierungen durch die Rechteinhaber hinzuweisen.
Filterergebnisse
TEKNIC
CPM-SDSK-3411D-RLS
SERVO MOTOR, INTEGRATED SERVO SYSTEM, CLEARPATH SERIES, 1/2 INCH STROKE, 24/75 VDC, 10 AMPS, MOTOR FRAME SIZE: NEMA 34 - 3.42 INCHES, 220 WATTS, 4000 RPM
✓ AUF LAGER!
€350,20
Preis inkl. MwSt.:
€416,74
TEKNIC
CPM-MCVC-3421D-RLN
SERVO MOTOR, 24-75VDC, MAX SPEED 4000 RPM, 0.5IN SHAFT DIA, 935 W PEAK, LOGIC INPUT VOLTAGE RANGE 4.0-28VDC
€249,39
Preis inkl. MwSt.:
€296,78
TEKNIC
CPM-MCVC-3432P-RLS
SERVO MOTOR, NEMA 34 - 3.42, INPUT VOLT 24-75 VDC
€320,40
Preis inkl. MwSt.:
€381,27
TEKNIC
CPM-MCPV-2311S-RQN
MOTOR, 24-75 VDC, 10 AMP, MCPV SERIES, 0.25 IN SHAFT DIAMETER
€321,26
Preis inkl. MwSt.:
€382,29
TEKNIC
CPM-MCPV-2310S-RLS
INTEGRATED SERVO, NEMA 23, INPUT (BUS): 24-75 VDC, 4000 RPM, 45 OZ-IN TORQUE, ACHIEVABLE RESOLUTION:0.450 DEGREES,ROTOR INERTIA: 0.4 OZ-IN², LOGIC INPUT: 4.0 TO 28 VDC
✓ AUF LAGER!
€145,87
Preis inkl. MwSt.:
€173,58
TEKNIC
CPM-SDSK-2321S-RLN
SERVO MOTOR, NO SHAFT SEAL, .375IN SHAFT DIA, ENHANCED OPTION
✓ AUF LAGER!
€266,01
Preis inkl. MwSt.:
€316,56
TEKNIC
CPM-MCVC-2310S-RLN
SERVO MOTOR, 223OZ-IN TORQUE, 4000RPM, 24 - 90 VDC
€252,61
Preis inkl. MwSt.:
€300,61
TEKNIC
M-3432P-LN-20D
SERVO MOTOR,6000RPM,10AMP,CLASS F,29.2 V/KRPM,341.9 OZ-IN,FLANGED
€334,23
Preis inkl. MwSt.:
€397,73
TEKNIC
CPM-MCPV-2311P-RLN
SERVO MOTOR, 4000 RPM, PEAK POWER: 429 W / 0.57 HP, RMS POWER: 86W / 0.11 HP
€318,68
Preis inkl. MwSt.:
€379,23
TEKNIC
CPM-MCVC-2310S-RQN
SERVO MOTOR, INTEGRATED SYSTEM, NEMA 23 FRAME, 24-75VDC, 400RPM MAX
€254,25
Preis inkl. MwSt.:
€302,56
TEKNIC
CPM-MCVC-2331S-RLN
SERVO MOTOR, MOTOR FRAME SIZE- NEMA 23 - 2.33 IN, 24-75 VDC, PEAK TORQUE- 620 OZ-IN, CONT. (RMS) TORQUE- 124 OZ-IN, MAX SPEED- 2520 RPM, PEAK POWER- 355 W, CONT. (RMS) POWER- 206 W
€110,39
Preis inkl. MwSt.:
€131,36
TEKNIC
CPM-MCVC-3441S-RLN
MOTOR, CLEARPATH, 840 RPM, 24-75 VDC, 13.0 N-M PEAK TORQUE, 12.70 MM SHAFT DIAMETER, NEMA 34
€341,87
Preis inkl. MwSt.:
€406,82
TEKNIC
M-2321P-LN-08D
MOTOR, SHAFT DIAMETER: 0.375 IN (9.53 MM), 8 POLE, NEMA 23, 6000 RPM
€264,01
Preis inkl. MwSt.:
€314,18
TEKNIC
CPM-SDSK-2321S-ELN
MOTOR, 0.23 HP, 3170 RPM, 24-75 V, 9.53 MM SHAFT DIAMETER, 25 LBF, NEMA 23
€339,30
Preis inkl. MwSt.:
€403,76
TEKNIC
CPM-MCVC-3446P-RLN
SYNCHRONOUS MOTOR, BI-DIRECTIONAL, DC, IP53
€357,20
Preis inkl. MwSt.:
€425,06
TEKNIC
CPM-SDSK-3411D-ELN
INTEGRATED SERVO SYSTEM, NEMA 34 - 3.42 IN (86.87 MM) SQ., 24-75 VDC (90 VDC MAX),DUST & WATER SPLASH RESISTANT
€358,04
Preis inkl. MwSt.:
€426,07
TEKNIC
CPM-MCVC-3436P-RLN
INTEGRATED SERVO SYSTEM, 24-75 VDC INPUT, 1,047 OZ-IN PEAK TORQUE, 2370 RPM
€358,90
Preis inkl. MwSt.:
€427,09
TEKNIC
CPM-MCPV-2311S-RLN
MOTOR, MCPV SERIES, 24-75 VDC, 10 AMP, 0.375 IN SHAFT DIAMETER
✓ AUF LAGER!
€206,66
Preis inkl. MwSt.:
€245,92
TEKNIC
ISC-M423-KCX-5-5-D
SERVO CONTROLLER, INTEGRATED DSP-BASE, 23AMP, 24-90VDC
✓ AUF LAGER!
€331,28
Preis inkl. MwSt.:
€394,23
TEKNIC
CPM-MCVC-3441D-RLS
MOTOR, INPUT 24-75 VDC, 10 AMP, 0.5 INCH SHAFT DIAMETER, 160 OZ-IN (1.1 NM), 3150 RPM, 0.49 HP (364 WATT)
€354,76
Preis inkl. MwSt.:
€422,17
TEKNIC
MPC034-24-003-T
NEMA 34 POWER-OFF BRAKE, FOR USE W/ SERVOMOTORS, SPRING-APPLIED NEMA FACE MOUNT, 9.2NM CLAMP COLLAR SCREW TORQUE, 6000RPM, 20-24VDC, IP54 PROTECTION
€233,88
Preis inkl. MwSt.:
€278,31
TEKNIC
CPM-SDSK-3441D-RLN
CLEARPATH® INTEGRATED SERVO SYSTEM, 24-75 VDC (90 VDC MAX) , NEMA 34 - 3.42 IN (86.87 MM) SQ., 3150 RPM
€381,86
Preis inkl. MwSt.:
€454,41
TEKNIC
CPM-SDSK-2311S-ELN
SERVO MOTOR, CLEARPATH-SDSK, 4000 RPM, 0.16 HP, 24-75 V, 0.375 INCH SHAFT, WITHOUT SHAFT SEAL
€294,71
Preis inkl. MwSt.:
€350,71
TEKNIC
CPM-SDSK-3432P-ELS
SERVO MOTOR, 24-75 VDC (90 VDC MAX), 267 W, 4.9. NM, 2380 RPM, SHAFT DIAMETER: 12.70 MM, W. MOTOR FRAME SIZE: NEMA 34 - 3.42 IN (86.87 MM) SQ., SHAFT SEAL, IP53
€398,87
Preis inkl. MwSt.:
€474,66
TEKNIC
CPM-SCSK-2321P-ELSA
SERVO MOTOR, 24 - 75 VDC, 10 A, 145 W 0.375 SHAFT DIA, 1.7 NM PEAK TORQUE, 4000 RPM,
✓ AUF LAGER!
€456,19
Preis inkl. MwSt.:
€542,87
TEKNIC
M-3441C-LN-02D
MOTOR, 6000 RPM, 111A, CLASS F, IP50 MOTOR BODY PIGTAIL, SOURIAU TRIM TRIO, NO SHAFT SEAL, ENCODER DENSITY : 2,000 COUNTS / REV (POST-QUAD)
€399,72
Preis inkl. MwSt.:
€475,67
TEKNIC
CPM-SDSK-3441S-RLN
SERVO MOTOR, CLEARPATH INTEGRATED SERVO SYSTEM, 24-75 VDC (90 VDC MAX), NEMA 34 - 3.42 IN (86.87 MM) SQ., 840 RPM
✓ AUF LAGER!
€401,42
Preis inkl. MwSt.:
€477,70
TEKNIC
CPM-SCSK-2311S-RQNB
SERVO MOTOR, 120 W, 4000 RPM, 24-75 V, 25 LBF MAX RADIAL LOAD, 5.0 LBF MAX THRUST LOAD, 0.250 INCH SHAFT DIAMETER, IP53
✓ AUF LAGER!
€304,75
Preis inkl. MwSt.:
€362,65
TEKNIC
CPM-MCPV-2321S-RLN
SERVO MOTOR, .375 INCH SHAFT DIAMETER, NO SHAFT SEAL, 24-75VDC, 10 AMP
€328,63
Preis inkl. MwSt.:
€391,07
TEKNIC
CPM-MCPV-3421S-ELN
MOTOR, CLEARPATH-MCPV, 1410 RPM, 4.0-28 V, 50 LBF, 0.50 INCH SHAFT, NEMA 34, IP53
€404,82
Preis inkl. MwSt.:
€481,74
TEKNIC
CPM-MCPV-3441S-RLN
SERVO MOTOR, CLEARPATH-MCPV, CONTROL POSITION, NEMA 34 - 3.42 IN, 24-75 VDC , 840 RPM, -40 TO +70 C
✓ AUF LAGER!
€386,54
Preis inkl. MwSt.:
€459,98
TEKNIC
M-3441C-LN-16D
SERVO MOTOR, HUDSON, BRUSHLESS, NEMA 34 FRAME SIZE, CLASS H INSULATION, 8 POLES, 0.5 IN SHAFT DIAMETER, INCREMENTAL ENCODER
€400,28
Preis inkl. MwSt.:
€476,33
TEKNIC
M-3422C-LN-02D
STEPPER MOTOR 11.7AMP 19.5V 267.2OZ-IN 6000RPM
€287,70
Preis inkl. MwSt.:
€342,36
TEKNIC
CPM-SDSK-N0561P-RLN
CLEARPATH® INTEGRATED SERVO SYSTEM,100-240 VAC (1- OR 3-PHASE), 50/60HZ, 2820 RPM
€417,57
Preis inkl. MwSt.:
€496,91
TEKNIC
CPM-SCSK-2311S-RQNA
MOTOR, SCSK SERIES, 24-75 VDC, 0.25 IN SHAFT DIAMETER, 4000 RPM, 120 WATTS
✓ AUF LAGER!
€166,57
Preis inkl. MwSt.:
€198,21
TEKNIC
CPM-SDSK-2341S-RLN
STEPPER MOTOR, CLEARPATH-SDSK, IP53, NEMA 23, 1.2-5.8 NM MAX, 0.375 INCH DIAMETER / SHAFT, 1860 RPM, 10 AMP, 24-75 VDC
€318,40
Preis inkl. MwSt.:
€378,89
TEKNIC
CPM-SCSK-2310-RLSA
SERVO MOTOR, CLEARPATH SERIES, 4000 RPM, 24-90 VDC INPUT RANGE, 45 OZ-IN CONTINUOUS TORQUE, 223 OZ-IN PEAK TORQUE, 4-28 VDC LOGIC INPUT, 5 LBF THRUST LOAD, 25 LBF RADIAL LOAD, DUST RESISTANT ...
€320,15
Preis inkl. MwSt.:
€380,98
TEKNIC
CPM-SDSK-3432S-RLN
SERVO MOTOR, 75VDC MAX SPEED, 0.03 DEGREES REPEATABILITY, 392 OZ-IN RMS TORQUE, 267 W PEAK POWER
€347,36
Preis inkl. MwSt.:
€413,36
TEKNIC
CPM-MCPV-2321S-RQN
MOTOR, NEMA23, 90 VDC MAX, 3170 RPM MAX, 24-75 VDC
✓ AUF LAGER!
€292,89
Preis inkl. MwSt.:
€348,54
TEKNIC
CPM-SCSK-2321S-RLNB
SERVO MOTOR, CLEARPATH SERIES, 24-75 VDC BUS INPUT VOLTAGE, 98 OZ-IN CONTINUOUS TORQUE, 492 OS-IN PEAK TORQUE, 3170 RPM, 173W, 5 LBF THRUST LOAD, 25 LBF RADIAL LOAD, DUST RESISTANT, WATER SP ...
€332,43
Preis inkl. MwSt.:
€395,59
TEKNIC
CPM-SDSK-2321P-EQN
MOTOR, INTEGRATED SERVO SYSTEM, CLEARPATH, 0.23 HP, 4000 RPM, 24-75 V, 6.35 MM SHAFT DIAMETER, 25 LBF, 1.7 N-M, NEMA 23, 0-95 PERCENT AMBIENT HUMIDITY, NON-CONDENSING
€342,08
Preis inkl. MwSt.:
€407,07
TEKNIC
M-3441S-LN-02D
SERVO MOTOR, HUDSON, NEMA 34, CLASS H, 0.5 INCH SHAFT DIAMETER, 16 INCH PIGTAIL LENGTH, INCREMENTAL ENCODER
€349,97
Preis inkl. MwSt.:
€416,47
TEKNIC
CPM-MCVC-2346D-RLN
DC MOTOR, CLEARPATH INTEGRATED BRUSHLESS DC SERVO MOTOR, 75 VDC, 6000 RPM, PEAK POWER: 1.96 HP, SHAFT DIAMETER: 0.375 IN (9.525 MM), IP53
€333,34
Preis inkl. MwSt.:
€396,67
TEKNIC
CPM-MCVC-3441S-RLS
MOTOR, INPUT 24-75 VDC (90 VDC MAX), PEAK TORQUE (@75 VDC)-532 OZ-IN (3.8 N-M), NEMA 34 - 3.42 IN (86.87 MM) SQ
€368,39
Preis inkl. MwSt.:
€438,39
TEKNIC
CPM-MCPV-2341P-RLN
SERVO MOTOR, CLEARPATH-MCPV, NEMA 23, 0.375" SHAFT DIA., 1.12 HP, 414 OZ-IN TORQUE, 4000 RPM, 75 VDC
€388,57
Preis inkl. MwSt.:
€462,39
TEKNIC
CPM-SCSK-2331S-RLSA
SERVO MOTOR, CLEARPATH-SCSK MODEL, NEMA 23, 620 OZ-IN, 2520 RPM, 0.375 INCH / 9.525 MM SHAFT DIAMETER, WITH SHAFT SEAL, REGULAR ENHANCED OPTION, ADVANCED FIRMWARE OPTION
€388,57
Preis inkl. MwSt.:
€462,39
TEKNIC
CPM-SCSK-2341S-RLNB
SERVO MOTOR, CLEARPATH-SCSK MODEL, IP53, NEMA 23, 828 OZ-IN, 1860 RPM, 0.375 INCH / 9.525 MM SHAFT DIAMETER, WITHOUT SHAFT SEAL, REGULAR ENHANCED OPTION, BASIC FIRMWARE OPTION
€397,34
Preis inkl. MwSt.:
€472,83
